===TCM DTC None=== Successful DTC reading, no error codes found Module: Transmission Control Module ===END TCM DTC None=== ===PCM DTC P1696:00-2F=== Code: P1696 - CAN Link Engine Control Module/Cruise Control Module Circuit/Network Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Powertrain Control Module Freeze Frame : -REALTIME: 35722969 s - Total time ECU has been active -DIST_TOT_VEH: 21417.0 km - Total Vehicle Distance -MAINPCM_V: 12.00 V - Control Module Voltage -OUTDR_TMP: 14 °C - Outdoor Air Temperature -LOAD: 0.00 % - Calculated Load Value -ECT: 43 °C - Engine coolant temperature -MAP: 94.0 kPa - Manifold absolute pressure sensor -RPM: 0 1/min - Engine Revolutions Per Minute -VSS: 0.0 km/h - Vehicle Speed -IAT: 34 °C - Intake Air Temperature -MAF: 1.24 g/s - Mass Air Flow -RUNTM: 0 s - Time Since Engine Start -MIL_DIST: 0.0 km - The distance travelled since the MIL was activated. -FLI: 35.69 % - Fuel Level -BARO: 94.0 kPa - Barometric pressure -VPWR: 11.90 V - Control Module Voltage -AAT: 14 °C - Ambient Air Temperature -APP_D: 0.00 % - Accelerator Pedal Position D -APP_E: 0.00 % - Accelerator Pedal Position E -FRP_ABS: 490.0 kPa - Fuel Rail Pressure (Absolute) -FRP: 490.0 kPa - Fuel Rail Pressure -EOT: 39 °C - Engine Oil Temperature -FUEL_TIMING: 0.00 ° - Main injection timing relative to top dead center -FUEL_RATE: 0.00 L/h - Engine Fuel Rate -TQ_DD: 0.00 % - Requested torque output of the engine by driver -TQ_ACT: 0.00 % - Calculated torque output of the engine ===END PCM DTC P1696:00-2F=== ===PCM DTC U023A:08-2F=== Code: U023A - Lost Communication With Image Processing Module A Additional Fault Symptom: - Bus Signal/Message Failures Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Powertrain Control Module Freeze Frame : -REALTIME: 35722970 s - Total time ECU has been active -DIST_TOT_VEH: 21417.0 km - Total Vehicle Distance -MAINPCM_V: 12.00 V - Control Module Voltage -OUTDR_TMP: 14 °C - Outdoor Air Temperature -LOAD: 0.00 % - Calculated Load Value -ECT: 43 °C - Engine coolant temperature -MAP: 94.0 kPa - Manifold absolute pressure sensor -RPM: 0 1/min - Engine Revolutions Per Minute -VSS: 0.0 km/h - Vehicle Speed -IAT: 34 °C - Intake Air Temperature -MAF: 1.24 g/s - Mass Air Flow -RUNTM: 0 s - Time Since Engine Start -MIL_DIST: 0.0 km - The distance travelled since the MIL was activated. -FLI: 35.69 % - Fuel Level -BARO: 94.0 kPa - Barometric pressure -VPWR: 11.90 V - Control Module Voltage -AAT: 14 °C - Ambient Air Temperature -APP_D: 0.00 % - Accelerator Pedal Position D -APP_E: 0.00 % - Accelerator Pedal Position E -FRP_ABS: 490.0 kPa - Fuel Rail Pressure (Absolute) -FRP: 490.0 kPa - Fuel Rail Pressure -EOT: 39 °C - Engine Oil Temperature -FUEL_TIMING: 0.00 ° - Main injection timing relative to top dead center -FUEL_RATE: 0.00 L/h - Engine Fuel Rate -TQ_DD: 0.00 % - Requested torque output of the engine by driver -TQ_ACT: 0.00 % - Calculated torque output of the engine ===END PCM DTC U023A:08-2F=== ===OBDII DTC None=== Successful DTC reading, no error codes found Module: On Board Diagnostic II ===END OBDII DTC None=== ===APIM DTC None=== Successful DTC reading, no error codes found Module: Accessory Protocol Interface Module ===END APIM DTC None=== ===DCDC DTC None=== Successful DTC reading, no error codes found Module: DC to DC Converter Control Module ===END DCDC DTC None=== ===PAM DTC B1B50:14-2B=== Code: B1B50 - Left Rear Inner Sensor Additional Fault Symptom: - Circuit Short To Ground Or Open Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Parking Aid Module ===END PAM DTC B1B50:14-2B=== ===PAM DTC B1B46:14-2B=== Code: B1B46 - Right Rear Inner Sensor Additional Fault Symptom: - Circuit Short To Ground Or Open Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Parking Aid Module ===END PAM DTC B1B46:14-2B=== ===PAM DTC B1B48:14-2B=== Code: B1B48 - Left Rear Outer Sensor Additional Fault Symptom: - Circuit Short To Ground Or Open Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Parking Aid Module ===END PAM DTC B1B48:14-2B=== ===PAM DTC B1B44:14-2B=== Code: B1B44 - Right Rear Outer Sensor Additional Fault Symptom: - Circuit Short To Ground Or Open Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Parking Aid Module ===END PAM DTC B1B44:14-2B=== ===BdyCM DTC B12C2:15-0A=== Code: B12C2 - Puddle Lamp Additional Fault Symptom: - Circuit Short To Battery Or Open Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Body Control Module ===END BdyCM DTC B12C2:15-0A=== ===DACMC DTC None=== Successful DTC reading, no error codes found Module: Digital Audio Control Module C ===END DACMC DTC None=== ===FCIM DTC None=== Successful DTC reading, no error codes found Module: Front Controls Interface Module ===END FCIM DTC None=== ===TRM DTC None=== Successful DTC reading, no error codes found Module: Trailer Module ===END TRM DTC None=== ===C-CM DTC None=== Successful DTC reading, no error codes found Module: Cruise-Control Module ===END C-CM DTC None=== ===ABS DTC None=== Successful DTC reading, no error codes found Module: Antilock braking system ===END ABS DTC None=== ===RTM DTC None=== Successful DTC reading, no error codes found Module: Radio Transceiver Module ===END RTM DTC None=== ===RCM DTC None=== Successful DTC reading, no error codes found Module: Restraint Control Module ===END RCM DTC None=== ===PSCM DTC None=== Successful DTC reading, no error codes found Module: Power Steering Control Module ===END PSCM DTC None=== ===ACM DTC None=== Successful DTC reading, no error codes found Module: Audio Control Module ===END ACM DTC None=== ===SCCM DTC None=== Successful DTC reading, no error codes found Module: Steering Column Control Module ===END SCCM DTC None=== ===IPC DTC None=== Successful DTC reading, no error codes found Module: Instrument Panel Control Module ===END IPC DTC None=== ===GWM DTC None=== Successful DTC reading, no error codes found Module: Gateway Module A ===END GWM DTC None=== ===IPMA DTC C1001:54-AF=== Code: C1001 - Vision System Camera Additional Fault Symptom: - Missing Calibration Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is On for this DTC Module: Image Processing Module A ===END IPMA DTC C1001:54-AF=== ===IPMA DTC C1001:78-AF=== Code: C1001 - Vision System Camera Additional Fault Symptom: - Alignment Or Adjustment Incorrect Status: - DTC Present at Time of Request - Malfunction Indicator Lamp is On for this DTC Module: Image Processing Module A ===END IPMA DTC C1001:78-AF===