Ranger Mods

Try again mate but I would put money on that the sensors are not in the Tyres ( hence no programming ). Post a close up pic of the valve stem for me.

Good job Luke, you will not regret it.

Welcome Adam, enjoy your stay and hopefully you will some more mods for your vehicle.

Thanks Corey, I notice we both work for the same department and only suburbs away. brown.stewart.a@ will give you the answer.

Have a look at the Forscan guide then use the appropriate codes in the spreadsheet. Any dramas then feel free to ask.

Welcome and good luck. Any dramas then feel free to ask.

Pitch and Roll still playing. Had a play tonight actually.

Depending what you are after. Have a look in the technical section, asbuilt etc. I will add more from my list as time permits.

Just keep in mind that any of the asbuilt changes listed for the Rangers is NOT compatible with the BT50. If you require Tyre size changes on the BT50 I'm pretty sure I can change them with Ford software or you may be able to do it with Forscan in CCC mode using the correct calibration files. You're...

Hi mate. Look here viewtopic.php?f=29&t=238 or use Forscan.

Sounds like a brilliant setup. Would love to see a few photos.

Clean looking rig. Enjoy your stay

Welcome Jonesy,

Follow this guide http://www.saeb.net/viewtopic.php?f=12&t=14 as it does cover the fuel tank change.

A lot of it was early days while still testing the IPC. Since then I went through every bit available and updated my own notes. Trying to go back and find old posts and updates over there is time consuming. What you see here especially on the sticky threads should be up to date. Sent from my SM-G930...

Hold tight guys. Don't use full lines of code as you could break cars that may have different options. I had one of these at the meet and had to re-write everything back to default and start over. Use 720-05-01 xxBx-xxxx-xx changing only the one item (B). At the moment you probably have a 7 instead ...

Sorry mate no idea. Are they not just a Scangauge clone?

Try the Scangauge listings?

Sounds like a nice setup Peter. Enjoy the forums.

Welcome Jim.

Have fun modding your new truck and feel free to ask questions whenever you want.

Stewart

So far away but so close.

Make sure you backup your modules before programming. There a slight differences in the SA models and not every asbuilt change will work.

Welcome and good luck.

I'm sure you will sort it but any dramas then put up at post.

Glad to have you onsite Frank. You're right, unfortunately the programming side of things will not suit your BT50 but the Scangauge, Ultragauge, Torque and OBDlink hardware and apps will work with most custom settings. Your current life sounds like a winner. Enjoy the countryside there is soooo much...

You're welcome mate. It's the little extras that can make such a difference.

You're welcome Lee. They are some mammoth wheels you have there. What is your fuel economy like? ( Real figures, not dash)

Still a baby and you have so much to tinker with. I'm sure it will grow up nice and strong sooner than later.

Enjoy your new ride.

Welcome Jordan, I'm sure it will all grow in time as we all have a bit more to share.