Ranger Mods

Hi mate, 1. You will never get the speedo 100% with 20inch rims. An adjust can be made which will still help a little though, you will need Forscan for this or hit me up when you are ready and I can complete for you. Jaycar module will not cut it in this case as everything is Canbus based. 2. I noti...

3rd party scantool, Ford IDS or Forscan. Forscan is your cheapest option though. Basic scantools will only clear PCM DTC's.

You would be surprised at how many do. Enjoy your stay.

Use Forscan to check for fault codes on the BCM first, then reset faults codes on this module.

Ultragauge MX 1.3 buy direct from the States.

viewtopic.php?f=19&t=1101

Pre face lift as in it is running PX1 modules? If yes then you cannot make the required modification. Either way if you run good quality LED's that have good quality canbus modules then you should not get faults anyway.

I have a trick up my sleeve and it may or may not work, you are in Vic so PM me.

Post in the TorquePro app or OBDLink for the required info and you shall receive. Technical information stays out of the introduction area.

Welcome

Ditch the elm and get the OBDlink or an ELS27, you will not regret it.

Read through the Forscan area and if you have any questions feel free to start a new topic.

Gesneriad wrote: ↑Wed Jan 24, 2018 8:39 pm Hi Stewart,
Did you install the ARB tank yourself?

Thanks,

Rick.

Yes mate. Make sure to get the dish washing detergent out and make those straps really slippery and it will go in so easy. I did mine at the time on a dirt covered carport without an issue.

Post the link up in the electrical area as it may be helpful to others.

Honestly I doubt you will notice any difference. Enjoy!

Welcome and Why?

Please give us a review on the before and after Unichip. Possibly drive it for a few weeks as I would really like to know your thoughts.

I think you will find not having any weight in the back will be the problem.

Try and take some vehicles for a drive that fit what you are looking for and see what you think.

Good advice Gerry. Also throw all of this http://www.liqui-moly.com.au/diesel-injection-cleaner-with-anti-knock-2789/ in half a tank of diesel. Yes I overdosed. When I was having issues the other week I gave it a go. Its basically a combination of alkanes, oils and a cetane booster. Yes you could ma...

How many KM on the odometer?

What fuel do you use?

I bought Caltex Vortex this week and have dropped 1.3 litres per 100 vs no name fuel.

Use the latest version of Forscan. In the latest version I have added them in as non asbuilt options so its as easy as enable disable.

Same as Gerry, I have the ARB for all the same reasons and they are not prone to cracking either so win.

The changes you can do will be listed in Forscan one you download your required boot loader file.

The are no further options for a PX1 than the preselected items listed in forscan. Do not hand modify asbuilt on a PX1 or BT50 as you will most likely just cause issues.

May someone else can answer. Put a post in the Scangauge area, I do not use it for that purpose.

You will have pre made settings for tyre size on a PX1 in Forscan or even the dealer tool. The programming is different to a PX2 so you will be limited in what you can and cannot do. You will be looking at the non asbuilt BCMii section in programming where after downloading the correct calibration f...

Hi everyone I’m Zac located in Perth, just started doing some mods to my px mostaly mods that will benefit my work at a telecommunications technician doing rural work. Wanting to know if it possible to update the tank size on a px mk1 with forscan yet? Short answer, no. I tried one the other week, ...

Hi Will. Can you please check the device you registered on yesterday. I would say your device is compromised and has malware as there was spam left on the forum using your username, hence why your account was deleted.

Basically some 3rd party had your username and password.