Ranger Mods

Nice setup.

Love the back drop. Been a while since I have seen the red dirt and do miss it.

Hi Joel, Not really the place for it mate. You will need the correct license file and calibration files etc. as you have already read. Try the XDA forums or the US sites but you will be lucky to find what you need without paying for it. At the end of the day you are better off tracking down a Sync 3...

What is it you are actually looking for Joel?

Welcome.

Fitting instructions for this bar are in the instructions area. Reply to this and you will have full access and be able to download them.

Search the first part of your part number before the slash.

Welcome, not sure if the SA Ambiente has the required components. PM me your VIN and I can see.

PX2 viewtopic.php?f=12&t=14

PX1 viewtopic.php?f=12&t=1213

Welcome Dan.

Alloy or steel tray?

Welcome, interesting story. I hope you enjoy your Ford!

If there are definitely sensors in the tyres then you are getting interference from another device in the vehicle. Could be a dash cam, another additional add on etc. What non factory accessories have you installed?

Well done, all round!!

Get this one wp/product/forscan-usb-dongle/, you will be glad you did.

Thanks for the heads up and hopefully it completely solves the problem.

Welcome, possibly share your experience, do and don'ts etc on the Sync 1 to 2 install.

I can only go by your fault codes as I assume you did the scan after the repairs were made? I will not guarantee a fix bit I would like you to clear all the fault codes with Forscan as at least then you can list any new fault codes that do come up. So please do list them after a clear, a drive, a re...

Have you cleared the fault codes though? The fault code states water in fuel, so the vehicle thinks there is water in fuel. Until you clear the fault code then it will still think there is water in fuel. If you clear it and it comes straight back then the bowl has not been drained properly of the wa...

Makes sense.

PCM fault code is water in fuel. Drain replace fuel, replace filter and drain water from bottom of filter.

Welcome mate.

Have a read of the forums but you will need one of these wp/product/forscan-usb-dongle/ or an OBDlink to see all the modules in your vehicle.

Nice list you have there. Try throwing a few cans of this through and see if it gets the economy up http://www.liqui-moly.com.au/diesel-inj ... nock-2789/

Enjoy your ride.

If after clearing the fault you still get the fault then I would say the fault code is correct. The BCM is pretty smart in these things, clearing faults are not limited but the FETS inside the BCM will basically expire after they reset themselves so many times. How many times I cannot tell you as I ...

I will move split this topic into another area once you respond.

Do you have access to any other equipment, Scantools, Forscan etc? I want to see what the responses are form other modules in the vehicle and Forscan is going to be the best option to complete what I need to know.

No outcome. As I cannot give a 100% certain that it will work or not I do not hear from anyone that wants to make a valiant offer to attend. It's not something I require so not willing to lose a day travelling everywhere.

No idea, they would be tuning it themselves and I have seen no dyno sheets.

Specs are meant to be approx 170kw and 560 Nm of torque, so probably half way between stock and my tune.

Speedo wise you may get away with it depending on what size tyres you put on. I done some comparisons with a 285 on 18 inch rims and the 20 inch ended up coming in smaller so you may come out ok.

Hi All Looking to make a few mods to my 2017 Wildtrak, e.g. remove door chimes as 1st point of call. I have an ELM327 that I bought from eBay for about $12.00. Going to download Forscan and give it a shot. The ELM327 is not compatible with the modules you wish to change. Get one of these https://ww...

Dual batteries have so many options. Have a read though and maybe put a post in the Electrical section of the board.