Nice setup.
Love the back drop. Been a while since I have seen the red dirt and do miss it.
Search found 219 matches
- Tue Sep 25, 2018 6:58 am
- Forum: Introductions
- Topic: Howdy!
- Replies: 3
- Views: 548
Re: Howdy!
Hi Joel, Not really the place for it mate. You will need the correct license file and calibration files etc. as you have already read. Try the XDA forums or the US sites but you will be lucky to find what you need without paying for it. At the end of the day you are better off tracking down a Sync 3...
- Sun Sep 23, 2018 12:00 pm
- Forum: Introductions
- Topic: Howdy!
- Replies: 3
- Views: 548
Re: Howdy!
What is it you are actually looking for Joel?
- Thu Sep 20, 2018 6:41 pm
- Forum: Introductions
- Topic: New from Perth
- Replies: 2
- Views: 434
Re: New from Perth
Welcome.
Fitting instructions for this bar are in the instructions area. Reply to this and you will have full access and be able to download them.
Search the first part of your part number before the slash.
Fitting instructions for this bar are in the instructions area. Reply to this and you will have full access and be able to download them.
Search the first part of your part number before the slash.
- Sat Sep 15, 2018 1:57 pm
- Forum: Introductions
- Topic: new Everest owner
- Replies: 1
- Views: 329
Re: new Everest owner
Welcome, not sure if the SA Ambiente has the required components. PM me your VIN and I can see.
- Sun Sep 09, 2018 5:36 pm
- Forum: Introductions
- Topic: Forscan DTE
- Replies: 4
- Views: 641
- Thu Sep 06, 2018 8:05 pm
- Forum: Introductions
- Topic: New member in Melbourne
- Replies: 1
- Views: 383
Re: New member in Melbourne
Welcome Dan.
Alloy or steel tray?
Alloy or steel tray?
- Mon Sep 03, 2018 11:30 pm
- Forum: Introductions
- Topic: New Ford owner
- Replies: 1
- Views: 388
Re: New Ford owner
Welcome, interesting story. I hope you enjoy your Ford!
- Thu Aug 30, 2018 12:52 pm
- Forum: Introductions
- Topic: New Member from the UK
- Replies: 3
- Views: 491
Re: New Member from the UK
If there are definitely sensors in the tyres then you are getting interference from another device in the vehicle. Could be a dash cam, another additional add on etc. What non factory accessories have you installed?
- Mon Jul 16, 2018 10:31 pm
- Forum: Introductions
- Topic: Hi! 200000km 2.2 Ranger owner from Moscow.
- Replies: 4
- Views: 543
Re: Hi! 200000km 2.2 Ranger owner from Moscow.
Well done, all round!!
- Sat Jul 07, 2018 12:50 pm
- Forum: Introductions
- Topic: Sydney Low Beam Issue
- Replies: 1
- Views: 405
Re: Sydney Low Beam Issue
Get this one wp/product/forscan-usb-dongle/, you will be glad you did.
- Wed Jul 04, 2018 10:45 am
- Forum: Introductions
- Topic: Ranger 2.2 2013 Lack of power/Won't Rev up
- Replies: 14
- Views: 416949
Re: Ranger 2.2 2013 Lack of power/Won't Rev up
Thanks for the heads up and hopefully it completely solves the problem.
- Sun Jul 01, 2018 11:31 pm
- Forum: Introductions
- Topic: forscan
- Replies: 5
- Views: 673
Re: forscan
Welcome, possibly share your experience, do and don'ts etc on the Sync 1 to 2 install.
- Wed Jun 20, 2018 8:08 am
- Forum: Introductions
- Topic: Ranger 2.2 2013 Lack of power/Won't Rev up
- Replies: 14
- Views: 416949
Re: Ranger 2.2 2013 Lack of power/Won't Rev up
I can only go by your fault codes as I assume you did the scan after the repairs were made? I will not guarantee a fix bit I would like you to clear all the fault codes with Forscan as at least then you can list any new fault codes that do come up. So please do list them after a clear, a drive, a re...
- Wed Jun 20, 2018 7:34 am
- Forum: Introductions
- Topic: Ranger 2.2 2013 Lack of power/Won't Rev up
- Replies: 14
- Views: 416949
Re: Ranger 2.2 2013 Lack of power/Won't Rev up
Have you cleared the fault codes though? The fault code states water in fuel, so the vehicle thinks there is water in fuel. Until you clear the fault code then it will still think there is water in fuel. If you clear it and it comes straight back then the bowl has not been drained properly of the wa...
- Tue Jun 19, 2018 6:48 am
- Forum: Introductions
- Topic: Ranger 2.2 2013 Lack of power/Won't Rev up
- Replies: 14
- Views: 416949
Re: Ranger 2.2 2013 Lack of power/Won't Rev up
Makes sense.
PCM fault code is water in fuel. Drain replace fuel, replace filter and drain water from bottom of filter.
PCM fault code is water in fuel. Drain replace fuel, replace filter and drain water from bottom of filter.
- Mon Jun 04, 2018 8:12 am
- Forum: Introductions
- Topic: Newby here Saying hi
- Replies: 1
- Views: 400
Re: Newby here Saying hi
Welcome mate.
Have a read of the forums but you will need one of these wp/product/forscan-usb-dongle/ or an OBDlink to see all the modules in your vehicle.
Have a read of the forums but you will need one of these wp/product/forscan-usb-dongle/ or an OBDlink to see all the modules in your vehicle.
- Wed Apr 11, 2018 10:02 pm
- Forum: Introductions
- Topic: New member from the Pilbara
- Replies: 1
- Views: 317
Re: New member from the Pilbara
Nice list you have there. Try throwing a few cans of this through and see if it gets the economy up http://www.liqui-moly.com.au/diesel-inj ... nock-2789/
Enjoy your ride.
Enjoy your ride.
- Mon Apr 09, 2018 8:11 pm
- Forum: Introductions
- Topic: Hi guys
- Replies: 5
- Views: 1080
Re: Hi guys
If after clearing the fault you still get the fault then I would say the fault code is correct. The BCM is pretty smart in these things, clearing faults are not limited but the FETS inside the BCM will basically expire after they reset themselves so many times. How many times I cannot tell you as I ...
- Mon Apr 09, 2018 5:42 pm
- Forum: Introductions
- Topic: New member from Barbados
- Replies: 1
- Views: 372
Re: New member from Barbados
I will move split this topic into another area once you respond.
Do you have access to any other equipment, Scantools, Forscan etc? I want to see what the responses are form other modules in the vehicle and Forscan is going to be the best option to complete what I need to know.
Do you have access to any other equipment, Scantools, Forscan etc? I want to see what the responses are form other modules in the vehicle and Forscan is going to be the best option to complete what I need to know.
- Mon Mar 19, 2018 8:50 pm
- Forum: Introductions
- Topic: Hello
- Replies: 3
- Views: 721
Re: Hello
No outcome. As I cannot give a 100% certain that it will work or not I do not hear from anyone that wants to make a valiant offer to attend. It's not something I require so not willing to lose a day travelling everywhere.
- Wed Mar 07, 2018 6:59 pm
- Forum: Introductions
- Topic: New to Rangers - looking for upgrade path
- Replies: 7
- Views: 1536
Re: New to Rangers - looking for upgrade path
No idea, they would be tuning it themselves and I have seen no dyno sheets.
Specs are meant to be approx 170kw and 560 Nm of torque, so probably half way between stock and my tune.
Specs are meant to be approx 170kw and 560 Nm of torque, so probably half way between stock and my tune.
- Sun Mar 04, 2018 12:30 am
- Forum: Introductions
- Topic: New to Rangers - looking for upgrade path
- Replies: 7
- Views: 1536
Re: New to Rangers - looking for upgrade path
Speedo wise you may get away with it depending on what size tyres you put on. I done some comparisons with a 285 on 18 inch rims and the 20 inch ended up coming in smaller so you may come out ok.
- Sat Mar 03, 2018 11:51 am
- Forum: Introductions
- Topic: Intro
- Replies: 3
- Views: 444
Re: Intro
Hi All Looking to make a few mods to my 2017 Wildtrak, e.g. remove door chimes as 1st point of call. I have an ELM327 that I bought from eBay for about $12.00. Going to download Forscan and give it a shot. The ELM327 is not compatible with the modules you wish to change. Get one of these https://ww...
- Thu Mar 01, 2018 6:17 am
- Forum: Introductions
- Topic: Factory settings
- Replies: 2
- Views: 413
Re: Factory settings
Dual batteries have so many options. Have a read though and maybe put a post in the Electrical section of the board.