Intro
-
- New Member
- Posts: 1
- Joined: Tue Dec 17, 2019 11:15 am
- Location: Berwick
- Model Of Vehicle: EVEREST AMBIENTE UA
- Year Of Vehicle: 2017
- Has thanked: 1 time
New to the group. I purchased an Ultra Gauge MX 1.4 for Ford Everest, mainly for trans temp. Default settings have the trans temp already displayed on the gauge but the readings can't be right, first drive and it got up to 140 degrees Celsius. I've been told to check that it's set at M Gauge 4, which I've done, but when I exited back to the main screen the trans read out was still high. I then went back into M Gauge set up and it opened on setting 1. Not sure if it should've stayed on 4? Anyone able to assist?
- RossPat
- Moderator
- Posts: 1408
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 1 time
- Been thanked: 19 times
Hey mate the easiest way to sort that out would be to send Stewart a PM.
Luckily for you he lives close to where you are.
Luckily for you he lives close to where you are.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4165
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 32 times
- Been thanked: 51 times
I'm confused.
I say just reset the whole unit back to factory defaults and use the gauges I have put here > viewtopic.php?f=19&t=58 <
I say just reset the whole unit back to factory defaults and use the gauges I have put here > viewtopic.php?f=19&t=58 <
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic