Hi All,
Just signed up.
I have a bt50 and just changed the instrument cluster. Some settings are slightly different like it no longer displays the air temperature. But the main concern is the odometer reading is blank. How do I resync/reset this. Is this something I can do or do I need to take it to someone.
I had to change the cluster as a number of the lights were not working so was unable to see some of the gauges at night. They are not changeable so bought a second hand cluster.
Thanks
Instrument cluster reset
-
- New Member
- Posts: 2
- Joined: Thu Sep 24, 2020 8:57 am
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2012
- Forscan Dongle Type: ELM327
Hi There mick. I just changed mine yesterday and noticed the same thing so im looking for info on this too i changed mine as i would be driving along and my dash would randomly light up like an xmas tree then go out.
- saeb
- Site Admin
- Posts: 4166
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 32 times
- Been thanked: 51 times
Take old and new cluster to Ford along with the vehicle. Get them to do a PMI on it which will read old cluster/write new cluster and odometer.
Otherwise if you know someone with Ford IDS then have them do the PMI.
Otherwise if you know someone with Ford IDS then have them do the PMI.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic