Ahoy

A place to introduce yourself to the community
Post Reply
P-L-N
Junior Member
Junior Member
Posts: 13
Joined: Wed May 11, 2022 8:11 am
Location: Canberra
Model Of Vehicle: RANGER WILDTRAK PX3
Year Of Vehicle: 2018
Forscan Dongle Type: SAEB Forscan Dongle WIN10

Gday all.

Pete here, im from Canberra.

Recently brought an 18 PX3 Wildtrak after selling my JK wrangler.

I come seeking answers to my queries.

I have brought an ELM 327 with a switch and downloaded FORscan to my computer but am yet to test it out.

I have a few things going on with this ranger, so i will start at the top;

Battery almost dead - want to replace it with something decent but affordable. I usually go to Optima's but im not sure that they will work as iv found nothing about it.

TPMS is not working on two of my wheels, not sure what the issue is, no idea if they were installed or not. Mostly just want to turn them all off.

The smart charging alternator is a concern, not sure if i should have it turned off or not.

Rain sensing wipers dont seem to work,
Start/stop doesnt seem to activate (likely the battery)
Lane keep assist doesnt work on the right side

Also nervous about installing accessories, as iv heard the electrical system in the ranger can be very sensitive. I hear that every accessory must be earthed to the body post close to the battery.

Anyway, i could keep going but i wont. Would be great to get some help on the FORscan side of things.

Cheers all. Looking forward to loving this Ranger, but im a bit nervous. (coming from a Jeep i know hahah)
18 PX3 Wildtrak 3.2 auto

Bilstein 3" lift & 32" Tyres build in progress
Post Reply