I tested today again and everyting seems to work.as it should be. Ar daylight drl is on whatever I turn the switch to zero. At nightime, drl goes off on zero position.
Thanks again for your help.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Are there any differences between Australian Rangers and European Rangers?
-
tugsay
- Junior Member
- Posts: 41
- Joined: Thu Jun 20, 2019 1:22 am
- Location: ankara
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Wifi
- Has thanked: 1 time
Saeb I tried to enable drl menu on screen bur it won't work on my ranger.
I tested today again and everyting seems to work.as it should be. Ar daylight drl is on whatever I turn the switch to zero. At nightime, drl goes off on zero position.
Thanks again for your help.
I tested today again and everyting seems to work.as it should be. Ar daylight drl is on whatever I turn the switch to zero. At nightime, drl goes off on zero position.
Thanks again for your help.
-
tugsay
- Junior Member
- Posts: 41
- Joined: Thu Jun 20, 2019 1:22 am
- Location: ankara
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Wifi
- Has thanked: 1 time
Hi again,
I understand the system now. It doesn't matter it' daylight or darkness, it disables drl when I pull the handbreak.
I told you that there is something wrong and now I figure out what it is.
When I stop the car and set the light switch to 0 position, drl is running but if I pull the handbreak it goes off...
It takes so long for me to understand this. I congratulate on myself.
I understand the system now. It doesn't matter it' daylight or darkness, it disables drl when I pull the handbreak.
I told you that there is something wrong and now I figure out what it is.
When I stop the car and set the light switch to 0 position, drl is running but if I pull the handbreak it goes off...
It takes so long for me to understand this. I congratulate on myself.
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Well done.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic