Page 1 of 1

Need a manual PX2 Ranger.....

Posted: Thu Aug 31, 2017 6:01 pm
by saeb
If a local Manual PX2 wants to try to fix their speedo without DTC then give me a PM.

There is a 99% chance you will drive away with a corrected speedo with what ever tyre choice you have.

I do not want an Automatic Transmission, I have one.

I will only do it in Ferntree Gully as if I need to reverse everything I require specific items and access.

Re: Need a manual PX2 Ranger.....

Posted: Mon Sep 04, 2017 9:14 pm
by GMFabs
If fern tree gully isn't too far out of the way, I might be in melbourne in a few weeks Stewart and can pop in with WT manual

Re: Need a manual PX2 Ranger.....

Posted: Mon Sep 04, 2017 9:26 pm
by saeb
GMFabs wrote: Mon Sep 04, 2017 9:14 pm If fern tree gully isn't too far out of the way, I might be in melbourne in a few weeks Stewart and can pop in with WT manual
Done one tonight mate. All done and dusted, BCM and PCM reprogrammed to suit.

Re: Need a manual PX2 Ranger.....

Posted: Mon Nov 20, 2017 8:21 am
by Wildtrak1602
saeb wrote:
GMFabs wrote: Mon Sep 04, 2017 9:14 pm If fern tree gully isn't too far out of the way, I might be in melbourne in a few weeks Stewart and can pop in with WT manual
Done one tonight mate. All done and dusted, BCM and PCM reprogrammed to suit.
My name is Troy. New to this page and have a 2017 auto Wildtrak. I want to put 35s on but would want the speedo recalibrated. Anyone on here able to help in the Sydney area?


Sent from my iPhone using Tapatalk

Re: Need a manual PX2 Ranger.....

Posted: Mon Nov 20, 2017 9:21 am
by GerryP
Sounds promising Stewart... ? After programming my new tyre size the distance and fuel dte is all very accurate, but of course the speedo is anout 7% out again, like it was when it left the factory

So are you sayimg you have found a way to adjust the actual speedo calibration only? The word 'Legend' springs to mind! :)

Re: Need a manual PX2 Ranger.....

Posted: Mon Nov 20, 2017 2:30 pm
by saeb
No Gerry. The above was related too;

I have found some manuals still through a PCM dtc when going too large in the BCM.

If this happens I also make changes to the PCM which seems to solve the issue.

The percentage difference is in the firmware and cannot be changed.

Re: Need a manual PX2 Ranger.....

Posted: Mon Nov 20, 2017 5:32 pm
by GerryP
saeb wrote: Mon Nov 20, 2017 2:30 pm No Gerry. The above was related too;

I have found some manuals still through a PCM dtc when going too large in the BCM.

If this happens I also make changes to the PCM which seems to solve the issue.

The percentage difference is in the firmware and cannot be changed.
:cry: Bugga... ya still a legend tho... :lol:

Re: Need a manual PX2 Ranger.....

Posted: Tue Nov 21, 2017 5:47 am
by Wildtrak1602
Hi Saeb I'm looking to put 35s on my Ranger. Is there a way to re calibrate the speedo and dte etc?


Sent from my iPhone using Tapatalk

Re: Need a manual PX2 Ranger.....

Posted: Tue Nov 21, 2017 10:42 pm
by saeb
Yes mate. Have a read through the Forscan how to section and it will get you started.