Hi all.just done a lift on my ranger.
Front looks good but i think the rear looks a bit low.
If anybody has a stock ranger with a tub carrying little to no weight would you mind measuring centre of wheel to guard in a vertical line.my new lift is sitting at 610mm front and 615mm rear.
Cheers
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Centre wheel to guard measurements
-
Chewbacca450
- Junior Member
- Posts: 21
- Joined: Tue Mar 17, 2020 7:58 pm
- Location: Melb
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
-
RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Hi.
The stock height from the hub centre to the inner guard is.....
Front: 550mm
Rear: 600mm
The stock height from the hub centre to the inner guard is.....
Front: 550mm
Rear: 600mm
2018 XLT PX2 in Winning Blue
-
Chewbacca450
- Junior Member
- Posts: 21
- Joined: Tue Mar 17, 2020 7:58 pm
- Location: Melb
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
Awsome thanks.
Where did you get that info from mate?
Where did you get that info from mate?
-
RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I measured my Ranger the day I got it
Measured some others and the same height
2018 XLT PX2 in Winning Blue
-
Chewbacca450
- Junior Member
- Posts: 21
- Joined: Tue Mar 17, 2020 7:58 pm
- Location: Melb
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
Sweet.thanks