Page 1 of 1
Scangauge Codes for Xgauge
Posted: Sat May 27, 2017 6:26 am
by RangerTray
Please list any Ranger known working Scangauge Xgauge codes Here:
Re: Scangauge Codes for Xgauge
Posted: Sat May 27, 2017 10:15 am
by saeb
RangerTray wrote: ↑Sat May 27, 2017 6:26 am
Please list any Ranger known working Scangauge Xgauge codes Here:
Under Hardware & Programming a thread has been started for Scangauge codes
http://www.saeb.net/viewforum.php?f=18
Re: Scangauge Codes for Xgauge
Posted: Thu Oct 12, 2017 1:00 pm
by XLT066
Hi Stewart
re your scangauge code for ATF
differential of 10 degs between yours(lower) and scangauge default
any reason you reckon for this
regards Drew
Re: Scangauge Codes for Xgauge
Posted: Thu Oct 12, 2017 7:29 pm
by saeb
Didn’t think Scanguage had the correct PID for the ATF.
Easy way is to compare to Forscan ATF PID and see. I do believe the codes Scangauge had on their site originally were wrong though. The calculations just didn’t add up.
Will punch it into my scangauge when I get a chance and compare mine to Forscan.
Re: Scangauge Codes for Xgauge
Posted: Fri Mar 02, 2018 5:23 pm
by hoges
Check out scangage 2 add a command on the aussie site it has the codes for ATF temp down load
Re: Scangauge Codes for Xgauge
Posted: Sat Mar 03, 2018 11:44 am
by saeb
The Australian site never had the correct information at the time. Here is the correct information on the last post.
viewtopic.php?f=18&t=81
Re: Scangauge Codes for Xgauge
Posted: Fri Mar 09, 2018 3:20 pm
by hoges
Put Stewarts codes for SG, ATF temp works perfect
Thanks from Hoges your the man.