Hello
while doing ABS bleed the program stopped with "service procedure interrupted" can anyone explain how to determine what caused the system to stop.
I tried multiple times and got up to the 3rd wheel however was unable to finish.
I tried with the key on and also the engine running
This also occurred when i tried to reset the variable turbo charger control after replacing the turbo and again dont know why
Thanks
Glenn
Note: I posted on Forscan forum and was told I would need to send in a log file from the computer, which I could do just want to know if there is a way I can read the error or if something I am doing is causing the fault
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
service procedure interupted
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Send your logs as it will give an answer to where the routine failed.
service procedure interrupted in Forscan is a failure error and most likely because the module did not respond or gave an invalid response.
service procedure interrupted in Forscan is a failure error and most likely because the module did not respond or gave an invalid response.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 50
- Joined: Mon Oct 15, 2018 8:39 am
- Location: Bairnsdale
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN7
- Been thanked: 4 times
Quick update, sent in logs to Forscan whom found the error.
Sent me a test Forscan version, which worked correctly and was able to complete service.
Actually impressed at the quick response
Sent me a test Forscan version, which worked correctly and was able to complete service.
Actually impressed at the quick response
Glenn