Ranger Mods

Hi guys just wanted to ask if someone could help me. The reverse camera works but when i turn my steering wheel the lines dont move. They used to but for some reason now after getting a suspension lift it doesnt. Thanks

Possible damaged LIN wire in the loom from the camera to BCM is all I can think of.

Only other reason for it to stop is faulty camera or BCM asbuilt changed incorrectly.

I'm pretty sure this is an option you can select in the settings on Sync 3. It's under the reverse camera settings somewhere.

Mine did this once on my old Territory. Disconnect battery for 5 minutes then reconnect fixed it


regards
Alan
====================================
2018 UA Everest Titanium, Shadow Black

Hi All,

I have the same problem as the original post. Did anyone have a fix for this.

I have tried turning it off and on in settings. Have also tried disconnecting battery.

Any other ideas.

Steve


Sent from my iPad using Tapatalk Pro

If you have disconnected the battery the steering lines will not work until you have driven forward at 20kph??

If that's not it, sorry I have nothing more.

Thanks anyway but had done that.


Sent from my iPad using Tapatalk Pro