Page 1 of 1
EOP and TCT
Posted: Thu Nov 26, 2020 6:16 pm
by D on the Deck
Hi, cant seem to get PID date for Engine Oil Pressure or Transfer Case Temperature.
Both are listed as PID's in Forscan Lite. I also use OBDII MX+. Does anyone have the PID id's for these. Cant find any.
Much Thanks in Advance.
D
Re: EOP and TCT
Posted: Thu Nov 26, 2020 8:59 pm
by RossPat
D on the Deck wrote: ↑Thu Nov 26, 2020 6:16 pm
Hi, cant seem to get PID date for Engine Oil Pressure or Transfer Case Temperature.
Both are listed as PID's in Forscan Lite. I also use OBDII MX+. Does anyone have the PID id's for these. Cant find any.
Much Thanks in Advance.
D
I am fairly certain that there are no sensors in the Ranger for those.
Re: EOP and TCT
Posted: Thu Nov 26, 2020 9:37 pm
by AS82XLT
They would be great one to have
Re: EOP and TCT
Posted: Fri Nov 27, 2020 7:12 am
by saeb
Both do not exist, there are no appropriate sensors for a PID to work.
Re: EOP and TCT
Posted: Fri Nov 27, 2020 7:43 am
by D on the Deck
Thanks Stewart.
Is there any other way to confirm engine oil is circulating other than the idiot light?
Re: EOP and TCT
Posted: Sat Nov 28, 2020 9:44 am
by saeb
Put your finger in the hole.
Not really, that is what the light is for, low oil pressure is not happy.
Re: EOP and TCT
Posted: Sat Nov 28, 2020 6:00 pm
by D on the Deck
Thanks mate.
Would have thought that with14+ Control Modules, Oil Pressure would get a look in.
Thanks.
Love your work
D