Page 1 of 1
Led bulbs
Posted: Thu Oct 10, 2019 1:21 pm
by Parisogden
So I am going to install led bulbs. I purchased can bus type leds. So my question is do I need anything else to avoid hyper flashing or bcm errors. Do the brakes and tail light need resistors.
Re: Led bulbs
Posted: Thu Oct 10, 2019 1:57 pm
by RossPat
Hi, if they are Canbus certified then they should work error free.
I have LED head, reversing and brake lights and no errors.
Re: Led bulbs
Posted: Tue Oct 15, 2019 6:07 pm
by saeb
Any BCM changes will still give hyper flash on LEDs that do not have enough resistance. I have tried all programming changes to override and it made no difference.
Re: Led bulbs
Posted: Wed Nov 20, 2019 8:32 pm
by Jeffhall71ranger
My low beam headlights flash intermittently just once about every 20 seconds when car is off and locked
Any suggestions
Re: Led bulbs
Posted: Sat Nov 23, 2019 10:35 pm
by saeb
Has to be an LED light issue, more so a driver issue. I have never experienced this with my Lightforce LEDs.