Page 1 of 1

Lo Beam Upgrade PX2

Posted: Fri Mar 02, 2018 4:48 pm
by hoges
Hi members after trying leds to no success, I think due to the projector type lens, to blue and dull I purchased some H9 Narva wiring connectors for $10 ( stock are H11 55w) and some H9 65w globes and wired the H9 connectors up. To fit the globes I had to trim (with side cutters) a smig off the top locator as the H9 is a bit wider than the H11 fitted the H9 globes and bingo much better Lo beam especially when you go from hi beam & driving lights
to lo beam. Also there is Youtube info sites on the upgrade.

Re: Lo Beam Upgrade PX2

Posted: Sat Mar 03, 2018 11:47 am
by saeb
Hi Hoges, surprising you had no success. I wouldn't go back to halogen after using mine for the last 12 months. What band did you try?

Re: Lo Beam Upgrade PX2

Posted: Sat Mar 03, 2018 1:56 pm
by hoges
Stewart I tried Phillips H11 180w/1800lm canbus series.

Re: Lo Beam Upgrade PX2

Posted: Sat Mar 03, 2018 2:58 pm
by saeb
I would say that was your problem, 1800lm is not very bright. Mine are at least 5600lm per light.

Re: Lo Beam Upgrade PX2

Posted: Sun Mar 04, 2018 4:06 pm
by hoges
Ok thanks for the heads up mate