Page 1 of 1
4x4 mode change in right IPC screen missing.
Posted: Sun Apr 29, 2018 6:18 pm
by Lonski
Was out on the beach today, and noticed that the 4x4 mode selected orange notifications in the right IPC screen no longer appear. Tried doing an IPC reset, but still nothing. Seems to go into 4x4 Low etc, but no notifications when it changes. Only changes ive made are the ones available in the non asbuilt options. I cant remember them all as there are a few ive changed.
Any ideas?
Re: 4x4 mode change in right IPC screen missing.
Posted: Mon Apr 30, 2018 3:51 pm
by saeb
Unless you get time in between. Try putting it all back to default and see if it returns.
If it is an issue from a change I have implemented then I will have it changed. Else when I have a spare minute I will default then try one change at a time, although I nearly running every change without an issue of the missing notification.
Re: 4x4 mode change in right IPC screen missing.
Posted: Wed May 02, 2018 7:23 pm
by Lonski
All fixed.
Was eventually going to do a restore of the original settings, but thought I might put it out there in case I missed something.
Anyway, that done and all changes reinstated, and all is good.
Funny though, I hadnt made any changes since before I had my Radar unit replaced and calibrated by Ford at last service (a TSM listed on here.. thanks), and also had not used the different modes, so didnt know they wernt working till last weekend.