Page 1 of 1
EOT?
Posted: Sun Sep 20, 2020 7:37 am
by Fran2a
Hi all,
With Forscan, I get 0° and 0v with the PCM EOT PID.
Is this PID not available on the Ranger of Is there a problem with the sensor or whatever?
Any advice?
Thanks
Re: EOT?
Posted: Sun Sep 20, 2020 5:25 pm
by saeb
3.2 does not have EOT.
Re: EOT?
Posted: Sat Feb 06, 2021 10:31 am
by mjt57
Today I found this in a search for data points (PIDs?) for the Torque app. Whilst it's Scan Gauge related in it they refer to engine oil temp which I thought wasn't supported.
https://www.scangauge.com.au/blog/news/ ... re-and-mo/
Gauge Engine Oil Temperature EOT
TXD 07E0229D5C
RXF C462059D365C
RXD 3008
MTH 00010001FFD8
If this is correct, how do I convert these values and add it to the Torque app to see if it will work?
Thanks.
Re: EOT?
Posted: Sat Feb 06, 2021 2:10 pm
by RossPat
The Ranger doesn't have an engine Oil Temp Sensor
Re: EOT?
Posted: Mon May 09, 2022 10:06 am
by Descott
This is a snapshot of the PX2 workshop manual which seems to allude to an engine oil temp sensor for the 3.2L?
Re: EOT?
Posted: Mon May 09, 2022 1:31 pm
by RossPat
I believe overseas models have an oil temp sensor but not in the Aussie model
Re: EOT?
Posted: Mon May 09, 2022 2:05 pm
by saeb
Descott wrote: ↑Mon May 09, 2022 10:06 am
This is a snapshot of the PX2 workshop manual which seems to allude to an engine oil temp sensor for the 3.2L?
3.2 Thai built does not have EOT. Its an on off switch.