Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Re-instating turned-off TPMS monitoring
-
- New Member
- Posts: 4
- Joined: Thu Jul 09, 2020 7:10 pm
- Location: Sydney
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
Hi all, I've seen various references on YouTube on how to turn off TPMS monitoring using a brake pedal press and three turns of the ignition key but none on how to turn it back on again afterwards. Is this possible or is it a one way street? I ask as I recently purchased some used rims with higher profile tyres for off-road use. Having fitted, I have discovered there are no sensors therein. I have ordered Ford OEM sensors but until they arrive and are fitted, I would like to turn the TPMS off temporarily. I can over-ride 'sensor fault' warning on dashboard but flags up every 10 mins or so and is damned irritating and I can't live with that until the tyres are sorted with sensors.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Never heard of beep 3 times, touch pedal, bang head stuff.
With Forscan you can disable and enable the TPMS system. If you are adding new sensors you will also need a TPMS training tool. Forscan adaptor and training tools are available in the shop.
With Forscan you can disable and enable the TPMS system. If you are adding new sensors you will also need a TPMS training tool. Forscan adaptor and training tools are available in the shop.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic