Are PIDs the same for 3.2 and 2.0 bi-turbo
Posted: Sat Nov 20, 2021 2:40 pm
This one is for the OBD2 savy
Using an Ultragauge, when gear position is working properly it shows a 1 in 1st gear etc. But for the first few minutes the gauge is displaying the gear code with a seven in front of the 1. This occurs on start-up for some 5 minutes or so. After reversing it shows 5 and after being in 10th gear the 1 stays displayed for 5 minutes as well.
I've used the PID calculator here so I'm assuming it's right. This is programing a 2018 XLT Bi-turbo.
My question is are the PID codes the same for the 3.2 and the 2.0 bi-turbo
Any help would be appreciated.
Using an Ultragauge, when gear position is working properly it shows a 1 in 1st gear etc. But for the first few minutes the gauge is displaying the gear code with a seven in front of the 1. This occurs on start-up for some 5 minutes or so. After reversing it shows 5 and after being in 10th gear the 1 stays displayed for 5 minutes as well.
I've used the PID calculator here so I'm assuming it's right. This is programing a 2018 XLT Bi-turbo.
My question is are the PID codes the same for the 3.2 and the 2.0 bi-turbo
Any help would be appreciated.