Door Ajar PIDs + Background Illumination % PID
Posted: Tue Jul 28, 2020 8:38 pm
Here's a few PIDs I've found over the last few days, all on a 2013 PX1 3.2L XLS Manual Dual Cab (Image for a bit of clarity reading it):
Long Name,Short Name,Mode,PID,Min,Max,Unit,Equation (Torque Pro),Header,Notes
4x4 Selector Switch,4x4 SW,22,1E77,0,100,N/A,LOOKUP(A::2='2H':3='4L':4='4H'),Auto,
Rear Differential,Rear Diff,22,04E5,0,100,N/A,LOOKUP(A::0='Unlocked':1='Locked'),Auto,
Charge Air Temperature,CAT,22,051C,0,100,degC,A-40,Auto,
Fuel Temperature,Fuel Temp,22,0522,-40,100,degC,A-40,Auto,
Calculated Engine Torque,CET,22,1E00,-3276.8,3276.7,Nm,(((SIGNED(A)*256)+B)/10,Auto,"The divisor here could be /8 or /10, unsure"
Door Statuses,DOORS,22,4066,0,100,N/A,"N/A (Bit 3 = FRD, 4 = FLD, 5 = BLD, 6 = BRD)",726,"For each door 0 = open, 1 = shut. Bit 7 and 8 always set to 1 I think?"
Background Illumination,BGND Illu,22,61BD,0,100,%,(A/255)*100,726,"Seems to be ~62% at max brightness at night, changing via dash button toggles down through options to 0%"
Long Name,Short Name,Mode,PID,Min,Max,Unit,Equation (Torque Pro),Header,Notes
4x4 Selector Switch,4x4 SW,22,1E77,0,100,N/A,LOOKUP(A::2='2H':3='4L':4='4H'),Auto,
Rear Differential,Rear Diff,22,04E5,0,100,N/A,LOOKUP(A::0='Unlocked':1='Locked'),Auto,
Charge Air Temperature,CAT,22,051C,0,100,degC,A-40,Auto,
Fuel Temperature,Fuel Temp,22,0522,-40,100,degC,A-40,Auto,
Calculated Engine Torque,CET,22,1E00,-3276.8,3276.7,Nm,(((SIGNED(A)*256)+B)/10,Auto,"The divisor here could be /8 or /10, unsure"
Door Statuses,DOORS,22,4066,0,100,N/A,"N/A (Bit 3 = FRD, 4 = FLD, 5 = BLD, 6 = BRD)",726,"For each door 0 = open, 1 = shut. Bit 7 and 8 always set to 1 I think?"
Background Illumination,BGND Illu,22,61BD,0,100,%,(A/255)*100,726,"Seems to be ~62% at max brightness at night, changing via dash button toggles down through options to 0%"