Page 1 of 1
Tyre pressure
Posted: Wed Aug 03, 2022 3:58 pm
by ColinT
Hi. I have added the tyre pressure PIDs for my front and rear tyres but I am unable to get any reading I have attached a photo of one pid to show you what I have attempted to do. Any comments to assist please.
Re: Tyre pressure
Posted: Wed Aug 03, 2022 9:07 pm
by RossPat
Hi
I also use an Obdlink MX Bluetooth without issues.
If the vehicle is or has been stationary for a while the readings may be scrambled
The wheels have to turn to wake up the sensors.
This is my Left Front T P, mine is a Ranger
- Screenshot_20220803-203210.jpg (230.54 KiB) Viewed 212 times
- Screenshot_20220803-203210.jpg (230.54 KiB) Viewed 212 times
Re: Tyre pressure
Posted: Thu Aug 04, 2022 5:43 pm
by CatHerder
ColinT wrote: ↑Wed Aug 03, 2022 3:58 pm
Hi. I have added the tyre pressure PIDs for my front and rear tyres but I am unable to get any reading
Did you install the correct sensors for your vehicle? The sensor model changed about 2018. (There are existing posts about the correct part numbers)
Re: Tyre pressure
Posted: Sat Aug 20, 2022 3:14 pm
by saeb
Everest Trend does not have TPMS sensors, hence nothing to display.
Re: Tyre pressure
Posted: Sun Aug 28, 2022 8:05 pm
Hi Stewart... Yes the Trend doesn't have the sensors in the tyres, but my Torque Pro app shows data from the ECU - like in the minus psi for all wheels, so yeah, it's just "no sensor" nonesense. But does this mean the ECU is capable, and if I fitted the genuine ford sensors, I would be able to view the data on Torque Pro via the ECU?
Cheers!
Re: Tyre pressure
Posted: Sun Sep 04, 2022 4:17 pm
by saeb
[email protected] wrote: ↑Sun Aug 28, 2022 8:05 pm
Hi Stewart... Yes the Trend doesn't have the sensors in the tyres, but my Torque Pro app shows data from the ECU - like in the minus psi for all wheels, so yeah, it's just "no sensor" nonesense. But does this mean the ECU is capable, and if I fitted the genuine ford sensors, I would be able to view the data on Torque Pro via the ECU?
Cheers!
Correct.
You will need to enable in IPC and BCM non asbuilt and start a training session and train the sensors in.
Training tools are in the store >
wp/ <