Hi all,
A week or so ago I had Bob Jane do a 5 wheel rotation and alignment.
They suggested fitting a valve base? in what was the spare so next time they could just break the bead and move the sensor without having to remove and swap the rubbers around.
Since then that sensor is not reading correctly.
I have an obd2 reader connected to my phone.
It seems to read the pressure at the start of the morning drive, then stays at that reading for the rest of the day, even when having multiple stops during the day.
The next morning the same thing happens again.
We are travelling through outback Qld and no Bob Janes around.
Any thoughts please?
Chris.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Tyre Pressure Sensor problems.
-
- Junior Member
- Posts: 14
- Joined: Mon May 22, 2017 9:56 pm
- Location: Mt Evelyn
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 2 times
- Been thanked: 2 times
2017 XLT with Tech Pack, tub replaced with tray and Tommy Camper S6X.
ARB Alum Bullbar, VRS Winch, Lovells GVM/GCM Upgrade, Redarc Tow Pro Elite.
ARB Alum Bullbar, VRS Winch, Lovells GVM/GCM Upgrade, Redarc Tow Pro Elite.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Probably an aftermarket faulty sensor. Replace it with a genuine and have it programmed in and see how it goes.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic