Good day
has any one installed a reverse camera on an XL, will i be able to use an aftermarket camera and are there any software changes needed to be done?
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
installing reverse camera on Ranger XL
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You would be best to get hold of the wiring diagrams on motorcraft for your specific vehicle then see what is involved. It is likely your plug on the back of the apim will not have the required pinouts in the first place, so then it will be tracking down a plug you can plug them from then wire appropiatly.
You would need to make changes to the apim asbuilt which ever way.
You would need to make changes to the apim asbuilt which ever way.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic