Page 1 of 1
Scangauge & Adblue
Posted: Thu May 03, 2018 6:00 pm
by Tezza
Hi All
Anyone know if there is a code that will provide Adblue tank levels on a scangauge for an Everest?
Thanks in advance.
Cheers
Re: Scangauge & Adblue
Posted: Thu May 03, 2018 10:26 pm
by saeb
I don't believe it has a has a float as such. I'm assuming it is an on off switch like on the washer fluid. Once it reaches it defined point it would trigger the cluster light.
I'm assuming the cluster does not show fluid level?
Re: Scangauge & Adblue
Posted: Thu May 03, 2018 11:36 pm
by Tezza
Yeah, that makes sense. The cluster just stats “fluid level ok” or tells you roughly how many kms of ranger you have left when it is running low.....
https://www.ford.com.au/content/ford/au ... 137741.jpg
Re: Scangauge & Adblue
Posted: Mon May 21, 2018 10:38 pm
by saeb
FYI, No float.
- 2018-05-21 22_35_43.png (259.59 KiB) Viewed 139 times
- 2018-05-21 22_35_43.png (259.59 KiB) Viewed 139 times
Re: Scangauge & Adblue
Posted: Tue Jul 10, 2018 3:54 pm
by Lonski
Forscan shows the level in litres left with "DCU.REDUCT_LITERS - Reductant Tank level amount" I asked similar over in the Torque App thread.
