Asbuilt Spreadsheet

DreaderX · Sat Jun 17, 2017 9:02 pm

That's really good to hear, Stuart.

Appreciate your help.

I'm scanning the modules now. Will send to you in a bit.

Thanks

DreaderX · Sat Jun 17, 2017 9:15 pm

I've sent the screenshot via PM, Stuart.

Also, in 726-26-01

It's set to 0101 0003 015A

when I tried changing it to xxxx xxxx x3xx
it gave an error Writing blocks failed - incompatible configuration.

After that it changed back to the original setting.

Sat Jun 17, 2017 9:29 pm

Sorry I meant you probably have xxxx-xxxx-x1xx change to xxxx-xxxx-x0xx

DreaderX · Sat Jun 17, 2017 9:49 pm

Ok done..

I didn't notice anything different after making the change.

Sat Jun 17, 2017 10:11 pm

I will have a look possibly tomorrow if not during the week.

DreaderX · Sat Jun 17, 2017 10:15 pm

Great!

Thanks again Stewart.

I just realised I misspelt your name.
Apologies

apsilon · Thu Jun 22, 2017 8:09 am

Anyone know what the TPMS menu displays? I'm about to fit aftermarket wheels and have bought extra Ford sensors to install in them and have seen the process for putting the vehicle into learning mode etc but does the TPMS menu allow you to display the individual air pressures?

I know I could just enable to these things but I'd rather not make a lot of changes and just limit to the ones I "must have". So far that's only silent mode but when I get around to getting an extended fuel tank I'll do the size for that as well.

ro1ex · Thu Jun 22, 2017 5:01 pm

Sports wrote: ↑Thu Jun 15, 2017 8:17 am
As above DO NOT change anything todo with APIM if you have sync3..

Hi Stewart et al,

Is anyone exploring APIM codes for Sync3?

Would dearly like to be able to input while moving...

Cheers, Ian

Thu Jun 22, 2017 5:33 pm

Ian, I'm not sure what different... and I don't think I've modified anything that would impact on this, but I can input whatever I want while moving. Mines a January 2017 build with Sync3.

ro1ex · Thu Jun 22, 2017 9:17 pm

GerryP wrote: ↑Thu Jun 22, 2017 5:33 pm Ian, I'm not sure what different... and I don't think I've modified anything that would impact on this, but I can input whatever I want while moving. Mines a January 2017 build with Sync3.

Hi Gerry, I wish... Mine is a Nov 2016, and as soon as I do 4km or more, it locks off from any input on the screen including phone keyboard, searching contacts, SMS etc. Damn annoying...as not even your passenger can input.

Ian

Sports · Fri Jun 23, 2017 8:58 am

apsilon wrote: ↑Thu Jun 22, 2017 8:09 am Anyone know what the TPMS menu displays? I'm about to fit aftermarket wheels and have bought extra Ford sensors to install in them and have seen the process for putting the vehicle into learning mode etc but does the TPMS menu allow you to display the individual air pressures?

The TPMS menu display on the Ranger option is "reset tyres" pretty crap really no pressure displayed at all.
Im running Torque Pro and that shows each tyre and the pressures.

Sports · Fri Jun 23, 2017 9:03 am

ro1ex wrote: ↑Thu Jun 22, 2017 9:17 pm
GerryP wrote: ↑Thu Jun 22, 2017 5:33 pm Ian, I'm not sure what different... and I don't think I've modified anything that would impact on this, but I can input whatever I want while moving. Mines a January 2017 build with Sync3.
Hi Gerry, I wish... Mine is a Nov 2016, and as soon as I do 4km or more, it locks off from any input on the screen including phone keyboard, searching contacts, SMS etc. Damn annoying...as not even your passenger can input.

Ian

Mine is a Nov 16 build also I don't remember changing anything and can input while moving. ill check and see if there was anything in the settings.

Blitzkerig · Fri Jun 23, 2017 6:06 pm

Does anyone know if you can get a ambient tempreature display on the screen of an XL? It has menu settings but no display anywhere.

ro1ex · Sat Jun 24, 2017 1:00 pm

Sports wrote: ↑Fri Jun 23, 2017 9:03 am
ro1ex wrote: ↑Thu Jun 22, 2017 9:17 pm
GerryP wrote: ↑Thu Jun 22, 2017 5:33 pm Ian, I'm not sure what different... and I don't think I've modified anything that would impact on this, but I can input whatever I want while moving. Mines a January 2017 build with Sync3.
Hi Gerry, I wish... Mine is a Nov 2016, and as soon as I do 4km or more, it locks off from any input on the screen including phone keyboard, searching contacts, SMS etc. Damn annoying...as not even your passenger can input.

Ian
Mine is a Nov 16 build also I don't remember changing anything and can input while moving. ill check and see if there was anything in the settings.

Thanks Mick, that would be appreciated. Not a huge issue and I completely understand the safety rationale for having such, but annoying when your passenger is also locked out and you have to stop the car to dial a number...

Ian

andrew1918 · Sun Jun 25, 2017 11:27 pm

Hi Stewart
I try enable parker light as the DRL but no luck.also try the fog light no luck too.

I am confuse about "726-50-01 01xx DRL Disabled " and 726-26-02 x1xx xxxx xx Enable parking lights on with DRL "

Pm you the IPC and BCM asbulit (enable fog light as DRL)
regards
Andrew

Sports · Mon Jun 26, 2017 7:58 am

ro1ex wrote: ↑Sat Jun 24, 2017 1:00 pm

Thanks Mick, that would be appreciated. Not a huge issue and I completely understand the safety rationale for having such, but annoying when your passenger is also locked out and you have to stop the car to dial a number...

Ian
G'day Ian,
Sorry for the late reply, I've had a look through my settings and can't find anything that would turn on input while in motion sorry.
I'd speak with your Ford dealer about a sync3 update, Ive been told by my dealer that there is an update it may fix the problem.

cheers

apsilon · Mon Jun 26, 2017 8:59 am

Sports wrote: ↑Fri Jun 23, 2017 8:58 am The TPMS menu display on the Ranger option is "reset tyres" pretty crap really no pressure displayed at all.
Im running Torque Pro and that shows each tyre and the pressures.

Ahh, so I already have that enabled then as I've seen that option. Pretty pointless really. I could set it up via the Scangauge but think that's better used for other gauges. Thanks.

Mon Jun 26, 2017 9:26 pm

apsilon wrote: ↑Mon Jun 26, 2017 8:59 am
Sports wrote: ↑Fri Jun 23, 2017 8:58 am The TPMS menu display on the Ranger option is "reset tyres" pretty crap really no pressure displayed at all.
Im running Torque Pro and that shows each tyre and the pressures.
Ahh, so I already have that enabled then as I've seen that option. Pretty pointless really. I could set it up via the Scangauge but think that's better used for other gauges. Thanks.

Unfortunately there firmware in the IPC does not have any other TPMS gauges.

Jbavich · Wed Jun 28, 2017 5:51 pm

May I get some advice please?
Im a bit confused with DRL options.

I would like the parkers to be the DRL's.
I want to keep Lane Assist (I see options for disable or enable lane assist in the spreadsheet)
All the options listed have me worried about changing.

Thank you
John

Jbavich · Wed Jun 28, 2017 6:25 pm

So... I just realised I could scroll a bit more to the right on the spreadsheet

And understand the disable/enable lane assist
Still confused though,
Do we need to change both IPC and BCM modules etc AND allow choices at 726-50-01 ?

Thank you again

Sat Jul 01, 2017 9:17 pm

Jbavich wrote: ↑Wed Jun 28, 2017 6:25 pm So... I just realised I could scroll a bit more to the right on the spreadsheet
And understand the disable/enable lane assist
Still confused though,
Do we need to change both IPC and BCM modules etc AND allow choices at 726-50-01 ?

Thank you again

Yes you do mate. If you have any problems them PM me your saved IPC and BCM abt files and I will modify and send back.

Sat Jul 01, 2017 9:20 pm

andrew1918 wrote: ↑Sun Jun 25, 2017 11:27 pm Hi Stewart
I try enable parker light as the DRL but no luck.also try the fog light no luck too.

I am confuse about "726-50-01 01xx DRL Disabled " and 726-26-02 x1xx xxxx xx Enable parking lights on with DRL "

Pm you the IPC and BCM asbulit (enable fog light as DRL)
regards
Andrew

Resolved. It was dark so any testing would show as not working due to low beams switch drl's off.

So DRL's do not work unless switch is in the AUTO position and light enough outside that the head lights have not turned themselves on yet.

Sat Jul 01, 2017 9:22 pm

Blitzkerig wrote: ↑Fri Jun 23, 2017 6:06 pm Does anyone know if you can get a ambient tempreature display on the screen of an XL? It has menu settings but no display anywhere.

No, XL does not have a temp sensor.

XLS and up have temp sensors.

Lonski · Mon Jul 03, 2017 9:14 pm

Found these ones for if you have a trailer with LED light and you get the hyperflash etc.

BCM 726-27-02 xxxx x1xx xxxx Trailer light outage detect
BCM 726-27-02 xxxx x0xx xxxx No trailer light outage detect

Wed Jul 05, 2017 1:08 am

Lonski wrote: ↑Mon Jul 03, 2017 9:14 pm Found these ones for if you have a trailer with LED light and you get the hyperflash etc.

BCM 726-27-02 xxxx x1xx xxxx Trailer light outage detect
BCM 726-27-02 xxxx x0xx xxxx No trailer light outage detect

Thanks Lonski, have these been tested on a Ranger or Everest? Pretty sure these were off a F150 that has monitors trailer lights and shows them on the display if they are out.

I have never had a problem with the PX2 and LED trailer lights by the way.