From my ranger.net post
Direct from PX2 Service Manual..
Seatbelt Minder Deactivating/Activating
Preparation
Apply the parking brake.
Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
Turn the ignition switch to the OFF position.
Close all the vehicle doors from the inside of the vehicle.
Deactivating/Activating
NOTE: Deactivation of the belt minder may also be carried out using IDS. Follow the instructions on the screen.
NOTE: The belt minder can be turned off independently for the driver and the front passenger by performing the following procedure.
Unbuckle the driver's safety belt.
Unbuckle the front passenger's safety belt.
Turn the ignition switch to the ON position (do not start the engine).
Wait until the safety belt warning indicator turns off.
NOTE: This step must be completed within 30 seconds or the procedure must be repeated.
Buckle then unbuckle the safety belt four times, ending with the safety belt unbuckled. Release the red unbuckle switch completely every cycle.
The safety belt warning indicator flashes momentarily to confirm the belt minder status change.
Turn the ignition switch to the OFF position. The deactivation/activation procedure is now complete
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Seatbelt Minder Deactivating/Activating
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Thu Jul 06, 2017 4:27 pm
- Location: zetland
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
Hi stewart
I've got a jan 16 XLT, I tried to deactivate to chimes but not go, has anyone else had any problems?
Cheers
Albert
I've got a jan 16 XLT, I tried to deactivate to chimes but not go, has anyone else had any problems?
Cheers
Albert
Cheers
Albert
PX2 XLT Fender Flares 20v9.5 285/60/20 ZLT
Albert
PX2 XLT Fender Flares 20v9.5 285/60/20 ZLT
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Not that I'm aware of Albert. There is no difference so it should work perfectly. Worst case it can be disabled in Forscan or Ford IDS or get Ford to disable it on your next service.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 26
- Joined: Thu Feb 21, 2019 8:35 pm
- Location: Vic, AU
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Been thanked: 7 times
How do i disable the drivers seat beltminder in forscan.
Im running the latest version of forscan but the beltminder is not listed in any of the non as built menus.
MY19 XLT 2.0l bi-turbo 10-speed.
Thanks.
Im running the latest version of forscan but the beltminder is not listed in any of the non as built menus.
MY19 XLT 2.0l bi-turbo 10-speed.
Thanks.
2018 MY19 Ranger XLT 2.0 biturbo 10-speed auto.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Are you using the latest build of Forscan? It will be in IPC non asbuilt. Post screen shot if you still believe there is an issue.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 26
- Joined: Thu Feb 21, 2019 8:35 pm
- Location: Vic, AU
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Been thanked: 7 times
Hi Yes using latest, 2.3.20 with extended license.
- Attachments
-
- screen.JPG (147.86 KiB) Viewed 465 times
- screen.JPG (147.86 KiB) Viewed 465 times
2018 MY19 Ranger XLT 2.0 biturbo 10-speed auto.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Thanks, I will look into it and post some as-built changes later.
Try the manual method for now.
Direct from PX2 Service Manual..
Seatbelt Minder Deactivating/Activating
Preparation
Apply the parking brake.
Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
Turn the ignition switch to the OFF position.
Close all the vehicle doors from the inside of the vehicle.
Deactivating/Activating
NOTE: Deactivation of the belt minder may also be carried out using IDS. Follow the instructions on the screen.
NOTE: The belt minder can be turned off independently for the driver and the front passenger by performing the following procedure.
Unbuckle the driver's safety belt.
Unbuckle the front passenger's safety belt.
Turn the ignition switch to the ON position (do not start the engine).
Wait until the safety belt warning indicator turns off.
NOTE: This step must be completed within 30 seconds or the procedure must be repeated.
Buckle then unbuckle the safety belt four times, ending with the safety belt unbuckled. Release the red unbuckle switch completely every cycle.
The safety belt warning indicator flashes momentarily to confirm the belt minder status change.
Turn the ignition switch to the OFF position. The deactivation/activation procedure is now complete.
Try the manual method for now.
Direct from PX2 Service Manual..
Seatbelt Minder Deactivating/Activating
Preparation
Apply the parking brake.
Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
Turn the ignition switch to the OFF position.
Close all the vehicle doors from the inside of the vehicle.
Deactivating/Activating
NOTE: Deactivation of the belt minder may also be carried out using IDS. Follow the instructions on the screen.
NOTE: The belt minder can be turned off independently for the driver and the front passenger by performing the following procedure.
Unbuckle the driver's safety belt.
Unbuckle the front passenger's safety belt.
Turn the ignition switch to the ON position (do not start the engine).
Wait until the safety belt warning indicator turns off.
NOTE: This step must be completed within 30 seconds or the procedure must be repeated.
Buckle then unbuckle the safety belt four times, ending with the safety belt unbuckled. Release the red unbuckle switch completely every cycle.
The safety belt warning indicator flashes momentarily to confirm the belt minder status change.
Turn the ignition switch to the OFF position. The deactivation/activation procedure is now complete.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic