Page 1 of 1
Daytime running lights need 12V
Posted: Tue Mar 09, 2021 7:47 am
by rick_b
Where is a good place to pull 12v from (ignition on) for my Stedi Daytime running lights?
Re: Daytime running lights need 12V
Posted: Thu Oct 07, 2021 7:58 pm
by m_attt
Positive feed to wiper motor
Re: Daytime running lights need 12V
Posted: Thu Oct 07, 2021 10:56 pm
by GerryP
Why not pull the proper feed from the BCM? Then activate using Forscan so they work on the auto setting and go off when the lights come on.
It will also work with any ignition feed as suggested, but run it via the NC contacts of a relay which is then switched by your lights to turn the DRLs off when you turn on the parkers or headlights. Pretty sure that's the legal requirements in most/all states (?).
Re: Daytime running lights need 12V
Posted: Wed Jan 05, 2022 7:17 pm
by Corndog
What is actually involved with installing the drl pigtails? From memory I don't think i have wires at the lighting plugs for drl. Does the pigtail get plugged into the bcm and is it an easy install? What load can this pinout handle?
Re: Daytime running lights need 12V
Posted: Wed Jan 19, 2022 2:33 pm
by saeb