Page 1 of 1
PX 1 to PX 3 wildtrak Dash cluster
Posted: Wed Feb 12, 2020 2:00 pm
by ambrose
Hi all
Seems like the tacho has died in my PX1 and I needs to replace the dash, the question I have is has anyone been able to upgrade the px 1 dash to the px3 wildtrak dash and what is required?
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Wed Feb 12, 2020 2:02 pm
by ambrose
Its is a the base model 2014 auto diesel 3.2 and sorry if the question has been asked before looked high and low wasn't able to find anything
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Wed Feb 12, 2020 10:32 pm
by saeb
PX1 electrical system is 100% incompatible with a PX2, PX3 electrical system.
You will need to replace it with a PX1 cluster and PATS(immobiliser) and mileage will need to be redone either with Forscan or by a Ford dealer.
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Thu Feb 13, 2020 1:51 pm
by ambrose
Cheers Stewart
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Sun Mar 01, 2020 8:51 pm
by ambrose
Hi Stewart
Just installed a XLT dash into the XL both PX1 the XLT dash from a 13 the XL is a 14 the odometer has not come up how do you get the odometer to work do, I require to get onto fordscan?
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Sun Mar 08, 2020 9:19 pm
by saeb
PMI should be done with Ford IDS so cluster, immobiliser and ODO is programmed correctly.
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Mon Mar 09, 2020 7:07 pm
by ambrose
Hi Stewart got the dealer to get the odo up but have lost the ambient temp from the XLT as mine is just the XL so trying to workout which code it is to get it back up
Re: PX 1 to PX 3 wildtrak Dash cluster
Posted: Tue Mar 10, 2020 1:01 pm
by saeb
Outside air temp is listed in IPC non as-built. Enable it and write.