Hi all,
I'm hoping to find the option to increase or remove the 30km/h speed limit on the factory rear diff lock on my 2017 XL. Any help would be appreciated.
Thanks
Ned
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
PX2 rear diff lock speed limit
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Hi Ned, it cannot be changed and is built into the firmware. It would basically be a safety feature hence no changable.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Or just add a manual switch and a diode. Remeber it is just a electric locker after all.
It is only a 2 wire 12 volt solenoid so there is no reason an override switch cannot be fitted. Just through a diode on to stop feed back, back to the module then you can use factory or your own switch.
It is only a 2 wire 12 volt solenoid so there is no reason an override switch cannot be fitted. Just through a diode on to stop feed back, back to the module then you can use factory or your own switch.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic