Do I need to do a MAF/MAP relearn procedure on my PX after cleaning them? If so, how?
I can only find instructions for the PJ/PK ranger.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
How to relearn MAP/MAF
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No idea, but I would say doubtful unless you have fault codes. Do you have any fault codes? If yes have you tried clearing them? Also look in the service section of Forscan and see if the function to reset exists.
If the vehicle is running properly after it is cleaned then the assumption is it will relearn if no faults.
Sorry I do not have access to a PX1 so cannot even plug IDS in and have a look.
If the vehicle is running properly after it is cleaned then the assumption is it will relearn if no faults.
Sorry I do not have access to a PX1 so cannot even plug IDS in and have a look.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 39
- Joined: Mon Apr 16, 2018 12:10 am
- Location: Perth WA
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2014
- Been thanked: 2 times
Thanks Stu, I am currently in Melbourne and left my scan tool in Perth so I’m flying blind at the moment!! I did disconnect the battery yesterday, hopefully that sorts it.
Power has returned, but not sure about the economy gauge yet. No engine check lights on the dash at all. I am off to Adelaide in a few days, will see how it goes before confirming all is well.
Power has returned, but not sure about the economy gauge yet. No engine check lights on the dash at all. I am off to Adelaide in a few days, will see how it goes before confirming all is well.
2014 XLT Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Good to hear. Were they your posts over at newranger?
I won't be back in Melbourne until Wednesday otherwise I would say call past and we can try resetting any learned values.
I won't be back in Melbourne until Wednesday otherwise I would say call past and we can try resetting any learned values.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 39
- Joined: Mon Apr 16, 2018 12:10 am
- Location: Perth WA
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2014
- Been thanked: 2 times
Yeah that’s me. Plenty of info on the PK/PJ but zero on the PX.
Thanks for the offer though, car is running like a dream today!! Will be doing the Nullarbor next week so hopefully it stays that way...
Thanks for the offer though, car is running like a dream today!! Will be doing the Nullarbor next week so hopefully it stays that way...
2014 XLT Auto