Ranger Mods

Hi guys,
Is it possible to turn on or retrofit Active Noise Cancelling in a PX3 XLS?

My search tells me people switch them off from putting AMPS in.
However, after driving an Everest I noticed a significant difference in engine/road noise and can only put it down to ANC.

2.0 or 3.2?

3.2 no, engine vibrations do not work well with it hence why they never had it.

2.0 should work but ACM will need to be replaced and the 3 microphones installed and wired in XLS and being there is less insulation it will still be an unknown to if it will work quiet as well.

ANC is tuned for the environment it is installed in.

3.2L
The Everest I had was also a 3.2L as well.

Sounds like a bit of work