Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Rear 12v socket.
-
- New Member
- Posts: 3
- Joined: Thu Aug 01, 2019 3:46 pm
- Location: Townsville
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
I just received my dongle from saeb and with much excitement turned off my key in ignition and door chime. I attempted to change the runtime on the power socket from 4500 to 24000. It worked then went back to standard ( ignition on ) after I made another change. It was still showing 24000 on FORScan. It took heaps of goes to get it back on then i did something else and it went back to standard. Can’t get it to stay on again. Any thoughts?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Cannot say I have had the issue before. 4500 is 75 minutes and is ample anyway. The battery monitoring system would shut them down long before this. How long are the 12 volt sockets actually staying on for?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Thu Aug 01, 2019 3:46 pm
- Location: Townsville
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
They are turning of instantly with the ignition.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk