Hey Guys, Iv changed tyres, and to be honest its easier if i just disable the tpms rather than swap them into the new tyres. I know its done in the BCM and IPC. anyone got an exact walkthrough. Cant find anything. Cheers
Re: PX3 TPMS Disable
Posted: Sat Jul 10, 2021 3:47 pm
by saeb
For you
Re: PX3 TPMS Disable
Posted: Thu Jul 15, 2021 2:21 pm
by ultim8
Hi,
I tried this on my Everest, but did not have an IPC module to make the second change.
(OK) [13:38:13.521] Connection to adapter has been established: FTDI #1:12345678
(OK) [13:38:13.523] Adapter: ELM327 v1.4
(OK) [13:38:13.655] Connection to vehicle has been established
(OK) [13:38:17.988] Vehicle: Ford Everest Duratorq Turbo Diesel Common Rail Injection 3.2L 2017 ( 2015 MY ), VIN: MNA*********39631
(OK) [13:38:19.869] Found module: DCU - Reductant Control Module
(OK) [13:38:22.820] Found module: TCM - Transmission Control Module
(OK) [13:38:26.483] Found module: PCM - Powertrain Control Module
(OK) [13:38:34.793] Found module: OBDII - On Board Diagnostic II
(OK) [13:38:35.707] Found module: APIM - Accessory Protocol Interface Module
(OK) [13:38:36.381] Found module: PAM - Parking Aid Module
(OK) [13:38:37.078] Found module: HCM - Headlamp Control Module
(OK) [13:38:38.049] Found module: BdyCM - Body Control Module
I did disable TPMS in BodyCM module and the light and ignition on warning are gone, but I'm guessing it may come back in 10-20km I'm guessing (since resetting via the dashboard seemed to last about that long).
Do I maybe just need a different USB/Bluetooth dongle and chuck the Ebay one?
Thanks,
Hugh
Re: PX3 TPMS Disable
Posted: Thu Jul 15, 2021 5:11 pm
by CatHerder
ultim8 wrote: ↑Thu Jul 15, 2021 2:21 pmDo I maybe just need a different USB/Bluetooth dongle and chuck the Ebay one?