Hi all, is there a way to disable the “press OK to change to mph/kph” on the digital speedometer screen on a Ranger PX2 XLT? I find myself occasionally changing it by accident (guessing it’s muscle memory from driving a PX1 in the past which had the cruise on button in the centre). I’ve noticed on the PX3 cluster it doesn’t have the text, instead shows the DTE below the speed from what I’ve seen. Is that possible? Or would that likely be a newer firmware on the IPC?
Thanks.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Disable “press OK to change to mph/kph”
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No to both of your questions. PX3 uses different hardware and also different firmware so they are not backwards or forward compatible.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic