Hi All
I'm an occasional 60 yo lurker looking to see what changes i can make to the display .
I have a 2022 build FX4 21.75 with only an M1 cluster probably due to the deletion of goodies by Ford at the end of production .
What changes are recommended ? I see that the double beep can be deleted but what additional info can be put on the cluster ? I have a scangauge 2 also . Tow a 2.8 ton van occasionally too .
Regards
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
M1 Cluster Options
-
RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Hi there.
Probably not a lot can be added to the actual cluster.
But there will be a lot of things than can be changed with Forscan and a laptop.
Do yourself a favour and PM Stewart (SAEB) about changes, he is the guru.
Take a drive to Seaford and get him to do any changes that can be done.
Probably not a lot can be added to the actual cluster.
But there will be a lot of things than can be changed with Forscan and a laptop.
Do yourself a favour and PM Stewart (SAEB) about changes, he is the guru.
Take a drive to Seaford and get him to do any changes that can be done.
2018 XLT PX2 in Winning Blue