Ranger Mods

Hi all. I have a problem on my passenger side low beam. The driver side works fine, low beam and high beam but on the passenger side it is only the high beam that works. I swop the globes around thinking it might be the globe that is faulty but it is not that. Any ideas on what the problem might be and how to get it fixed.

Not 100% sure, but check the fuses. Some cars have separate fuses for each globe and their job

Hi all fuses was checked all ok there and i dont see any damages to the wiring

You swapped globe then cleared DTCs also, or at least looked at DTCs?

hi globes was swapped and codes cleared via mobile app then swapped again and codes cleared again still no luck.

Time to get a test light out and start fault finding.

Make sure to turn the lights on when re checking for DTCs.