Ranger Mods

Hi, i dont know if anyone can help me, i own a 2015 Ford Transit and i have a scangauge and an ultragauge mx.
I already have converted 2 xgauges to ug format and they worked, however i am having a problem with the third xgauge.

These are the 2 i already converted and worked perfectly:

Scangauge Xgauge Ultragauge Xgauge
Dpf soot %
Txd 07E022057B Tdata 07E022057B0000
Rxf 04620505067B Mtch 62057B
Rxd 3010 Rpos 2010
Mth 000100010000 X:0001 /:0001 +:0000
Tctrl 93. Rctrl 31
Out 00 Ave 00 left/right 30
This has worked perfectly

This one i cannot get it to work on ultragauge but it works perfectly on scangauge:
Exhaust temp 2
Txd 07E022F478
Rxf 032100000000
Rxd 1810
Mth 0001000AFFD8

This is what i entered in ultragauge for this code
Tdata 07E022F4780000
Mtch 210000
Rpos 0810
X:0001 /:000A +/FFD8
Tctrl 93 rctrl 31
Out 00 Ave00. Left/right 10
Is there anything i did wrong?
If anyone can help me please i would be really grateful!

Thanks!

Common UG gauges are here, including DPF viewtopic.php?f=19&t=58&p=240#p240

The EGT one you have from the SG looks to be multi-frame. Sometime I find multi-frame in UG to be non consistent or just do not work with some modules.

Are you sure that PID is correct? It does not seem correct. There are 3 EGT sensors being 0354, 03F5 and 03F6 for temp anyway. Have you looked at Forscan and tested to current EGT PIDs in the latest version? If not please test these and confirm your findings first.

These may or may not be the same as a Transit by the way. Do you know what PCM model is in the the vehicle SID209 etc?

Thanks.

saeb wrote: ↑Sun Jun 03, 2018 6:57 pm Common UG gauges are here, including DPF viewtopic.php?f=19&t=58&p=240#p240

The EGT one you have from the SG looks to be multi-frame. Sometime I find multi-frame in UG to be non consistent or just do not work with some modules.

Are you sure that PID is correct? It does not seem correct. There are 3 EGT sensors being 0354, 03F5 and 03F6 for temp anyway. Have you looked at Forscan and tested to current EGT PIDs in the latest version? If not please test these and confirm your findings first.

These may or may not be the same as a Transit by the way. Do you know what PCM model is in the the vehicle SID209 etc?

Thanks.

Hi,thanks for the reply,

These pids are taken straight from the scan gauge website and i have used exhaust temp 1 and 2 for the past year on my scangauge and they function perfectly.
Exhaust Gas Temp 107E022F478 056206F40778 4010 00090032FFD8 EG1 Degrees Fahrenheit
Exhaust Gas Temp 207E022F478 032100000000 1810 00090032FFD8 EG2 Degrees Fahrenheit
Exhaust Gas Temp 307E022F478 032100000000 2810 00090032FFD8 EG3 Degrees Fahrenheit
Exhaust Gas Temp 407E022F478 032100000000 3810 00090032FFD8 EG4 Degrees Fahrenheit

The one i am interested in is egt2 as it shows the dpf temp, which is the one i need to monitor the dpf temps during regens.
The page you posted with the common UG
The 3 egt sensors that you posted (0354, 03f5 and 03F6), are they related to these pids iv'e copied from the scangauge site? Or are they something different?

The reason why i would like to use ultra gauge instead of scangauge is because UG has a built in alarm so when egt 2 goes over 550'c it sound meaning that its doing a regen.
As for the ecm i am not sure which SID it is, i'll have to try and find out.
The page you posted with the common UG gauges is good for me, as the dpf and egr gauge both worked on my UG with my transit.

Try changing RCTRL to 10 and you should be good.

saeb wrote: ↑Wed Jun 13, 2018 8:29 pm Try changing RCTRL to 10 and you should be good.

It works!!!!!!! Thanks vey much!!!!!!! I'll send a small donation when i have a chance!

Thanks mate, glad you got it sorted.