Page 1 of 1

2021.25 Gauges for new version of Cluster (Single Screen)

Posted: Tue Sep 07, 2021 8:02 pm
by simc767
Hi All,
Interested to see what success fellow members have had with getting some additional gauges to display on the updated cluster (Single Screen). Vehicle is only a few weeks old, 2021.25 version of the Ford Ranger.

So far I have managed to get the DPF displayed, as well the 4wd power distribution display.

Has anyone had and others added successfully?
- Voltage
- Turbo Boost
- EGT
- off-road Gauge (angle gauges)

I can confirm that the following general settings worked as expected (with the SAEB adapter) and as detailed on these forums. (legends :D)
Double Beep Disable
Driver Door Open Chime Disable
Battery Target Voltage Charge

Re: 2021.25 Gauges for new version of Cluster (Single Screen)

Posted: Wed Sep 22, 2021 4:22 pm
by saeb
Off road gauge should work although will be steering angle, you will not get pitch roll.
Basically everything except climate should work.
You will never get additional, volts, boost etc. etc. as they are not supported in firmware just like the other cluster.

Re: 2021.25 Gauges for new version of Cluster (Single Screen)

Posted: Thu Oct 21, 2021 10:22 pm
by andrejt
simc767 wrote: Tue Sep 07, 2021 8:02 pm Hi All,
Interested to see what success fellow members have had with getting some additional gauges to display on the updated cluster (Single Screen). Vehicle is only a few weeks old, 2021.25 version of the Ford Ranger.
Mine is a Ford Ranger Wildtrak 2020 2.0 bi-turbo auto EU version (Slovenija).
simc767 wrote: Tue Sep 07, 2021 8:02 pm So far I have managed to get the DPF displayed, as well the 4wd power distribution display.
Is the power distribution display actually working (displaying each wheel power) or does it just displays the car and nothing happens when you step on the gas?
simc767 wrote: Tue Sep 07, 2021 8:02 pm Has anyone had and others added successfully?
- off-road Gauge (angle gauges)
Mine off-road Gauge works, but WITHOUT pitch and roll angles :cry: It only shows the angles of the front wheels and diff lock (if it is enabled)....
simc767 wrote: Tue Sep 07, 2021 8:02 pm I can confirm that the following general settings worked as expected (with the SAEB adapter) and as detailed on these forums. (legends :D)
Double Beep Disable
Driver Door Open Chime Disable
This also works for me :mrgreen: