Page 1 of 1
PX2 Mods
Posted: Sun Nov 12, 2017 7:49 am
by kfa1950
Fitted central locking to tailgate, installed module to external mirror wiring to allow mirrors to fold
when vehicle locks and unfold when unlocked.
Sent from my iPhone using Tapatalk
Re: PX2 Mods
Posted: Sat Nov 18, 2017 12:33 am
by Lee_au
Great idea!
Re: PX2 Mods
Posted: Sat Nov 18, 2017 9:43 am
by Gesneriad
Would you have some details about the External Mirror module please?
Both where to purchase and how to install?
Thanks.
Re: PX2 Mods
Posted: Tue Nov 21, 2017 7:00 am
by kfa1950
Ashpoint Pty Ltd
02 93667219
0418229934
Michael Rychter
PO-40 Folding Mirror Kit
$110.00 including GST and freight.
The instructions that were sent for installation were incorrect. I modified instructions and sent back to Michael. The instructions are for a PX2. This module still allows the use of the button inside as well. There is also some extra functions when using the remote for lock and unlock. can lock and unlock with the mirrors staying put.
There is only 3 wires to connect to the BCM connectors. The 2 plugs connect to the mirror panel.
Re: PX2 Mods
Posted: Thu Feb 15, 2018 10:44 am
by seyffermick
hi can you send me a po-40 mirror folding kit thanks.
Re: PX2 Mods
Posted: Thu Feb 15, 2018 11:29 am
by saeb
seyffermick wrote: ↑Thu Feb 15, 2018 10:44 am
hi can you send me a po-40 mirror folding kit thanks.
Contact the supplier. Details are in the above post.
Re: PX2 Mods
Posted: Mon Feb 19, 2018 9:37 am
by paramidget
interestingly, this website is offering everything you do here for free Stewart at a cost. Looks like between $60 to $250 for remote access. I'm not sure if they are known to you or not. Their website is
http://techinno.com.au.
Re: PX2 Mods
Posted: Mon Feb 19, 2018 9:47 am
by GerryP
I guess it's inevitable that someone will grab what they can and try to capitalise on it. Sucks really!
Re: PX2 Mods
Posted: Mon Feb 19, 2018 10:22 am
by Evernew1
If they can't even spell correctly on their website not sure about their professionalism doing reprograms.
"Reprogramming you ranger" WTF ?
If using their services I would ask about what insurance cover they have if they stuff something up and brain dead a module.
To say nothing of their ethics (stealing people's research which is shared for free, and using it for commercial gain.)
Re: PX2 Mods
Posted: Mon Feb 19, 2018 1:48 pm
by saeb
It is what it is. I have seen it and took deep breaths long ago, most will be pulled from overseas anyway so I wouldn't use it unless I knew exactly what the codes changes were. Anyway moving on..
Re: PX2 Mods
Posted: Tue Feb 20, 2018 5:02 pm
by Phatallen
Hey mate, did you purchase a kit or do a diy with a master central locking motor?
Sent from my VKY-L29 using Tapatalk
Re: PX2 Mods
Posted: Tue Feb 20, 2018 11:52 pm
by kfa1950
Phatallen wrote:Hey mate, did you purchase a kit or do a diy with a master central locking motor?
Sent from my VKY-L29 using Tapatalk
Used a master, run 3mm twin cabling thru camera cable harness from tailgate to lock solenoid cabling on fuel door.
Sent from my iPhone using Tapatalk
Re: PX2 Mods
Posted: Wed Feb 21, 2018 6:13 am
by Phatallen
kfa1950 wrote:Phatallen wrote:Hey mate, did you purchase a kit or do a diy with a master central locking motor?
Sent from my VKY-L29 using Tapatalk
Used a master, run 3mm twin cabling thru camera cable harness from tailgate to lock solenoid cabling on fuel door.
Sent from my iPhone using Tapatalk
Great, thanks matey!
Sent from my VKY-L29 using Tapatalk