Ranger Mods

saeb wrote: ↑Wed Jun 19, 2024 12:49 pm This will probably do it

Outage Headlamps Config - Low Beam
726-26-02 xxxx-xxxx-x3xx

HID lights have halogen high beam so nothing else should be needed.

Timrog wrote: ↑Thu Jun 20, 2024 11:28 pm

saeb wrote: ↑Wed Jun 19, 2024 12:49 pm This will probably do it

Outage Headlamps Config - Low Beam
726-26-02 xxxx-xxxx-x3xx

HID lights have halogen high beam so nothing else should be needed.

Because I didn’t realise this error of 2018 headlights not being compatible with 2020 due to HID and I used the lights until they started flickering but then stopped using them to not damage anything, now my last concern is after installing relays and low beam config changes is there a fault to be cleared or reset needed whilst in Forscan? If so before or after program changes The guy I’ve found to help with do this is only learning forscan himself.. blind leading the blind so just trying to cover all bases before taking the leap

saeb wrote: ↑Mon Oct 19, 2020 10:15 pm If pre MY20.25 PX3 lights then they are HIDs and will require external relays to operate correctly or risk over loading the BCM which they 100% do.

If MY20.25 lights then they are LED and will plug in and work correctly. Note that DRLs run of the Parker circuit if retrofitted to pre PX3 vehicle unless wired otherwise.