Elecbrakes Brake Controller & Pin #2
Posted: Thu Sep 01, 2022 12:26 am
Hi Everyone,
I have a 2018 3.2 Everest Trend. With a purchase of a camper trailer which requires a brake controller, it also needs a switched 12v “ignition” on pin #2 for the redarc manager 30 to commence charging. The Elecbrakes brake controller would also like to use pin #2 to power the device - 10a (if possible - otherwise leave park lights on).
What would be the best way to have pin #2 switched 12v with 10a available for the brake controller? Is this something which can be programmed in the trailer module or will it require external wiring?
Many thanks in advance for your input.
I have a 2018 3.2 Everest Trend. With a purchase of a camper trailer which requires a brake controller, it also needs a switched 12v “ignition” on pin #2 for the redarc manager 30 to commence charging. The Elecbrakes brake controller would also like to use pin #2 to power the device - 10a (if possible - otherwise leave park lights on).
What would be the best way to have pin #2 switched 12v with 10a available for the brake controller? Is this something which can be programmed in the trailer module or will it require external wiring?
Many thanks in advance for your input.