Page 1 of 1
Ultragauge MX 1.3 Oil Pressure, Oil Temperature?
Posted: Fri Aug 04, 2017 2:15 pm
by yjbol
Hello everyone
Ultragauge MX 1.3 can enter Manufacturer codes to increase Oil Pressure, Oil Temperature? ** My car, ford everet 3.2+
Thank You
Re: Ultragauge MX 1.3 Oil Pressure, Oil Temperature?
Posted: Fri Aug 04, 2017 7:08 pm
by saeb
Increase? Of course it cannot.
The sensor in the Ranger only reads as on or off. It is also confirmed by looking in IDS. So low pressure or pressure. The sensor does not support oil temperature.
SA European models have the sensor as engine oil life can be enabled in the IPC.
Re: Ultragauge MX 1.3 Oil Pressure, Oil Temperature?
Posted: Fri Feb 15, 2019 7:58 pm
by Waynder
saeb wrote: ↑Fri Aug 04, 2017 7:08 pm
SA European models have the sensor as engine oil life can be enabled in the IPC.
Any chances of showing me into right direction on what do i need to change to enable that? Im from Croatia, and have late 2017 Wildtrak...
Re: Ultragauge MX 1.3 Oil Pressure, Oil Temperature?
Posted: Fri Feb 15, 2019 8:13 pm
by saeb
I may have it listed somewhere but will need to check my notes. Will advise when added.