Swap out of rims with different TPM sensors
Posted: Fri Aug 23, 2019 5:22 pm
Hi,
I’m sure this has been ask before but my browsing has not been successful in finding an answer.
I have an XLT PX2 2015. I recently removed the wheels and replaced with a set of FX4 rims. The FX4 wheels had existing (not the original supplied with my ute) TPM sensors installed.
On the first trip after changing I had the alarm on the dash for a tyre pressure fault which would be expected. I acknowledged and then reset this through the menu. I have not had any further alarms come up.
My questions are:
does this mean the Tyre Pressure Management Sytem has picked up the new sensors or system is probably not working?
If I deflated one to see if an alarm is generated would it have to be driven to check?
What pressure activates a low pressure alarm from factory?
Thanks in advance
Mick
I’m sure this has been ask before but my browsing has not been successful in finding an answer.
I have an XLT PX2 2015. I recently removed the wheels and replaced with a set of FX4 rims. The FX4 wheels had existing (not the original supplied with my ute) TPM sensors installed.
On the first trip after changing I had the alarm on the dash for a tyre pressure fault which would be expected. I acknowledged and then reset this through the menu. I have not had any further alarms come up.
My questions are:
does this mean the Tyre Pressure Management Sytem has picked up the new sensors or system is probably not working?
If I deflated one to see if an alarm is generated would it have to be driven to check?
What pressure activates a low pressure alarm from factory?
Thanks in advance
Mick