Hi Everyone,
I have a 2018 3.2 Everest Trend. With a purchase of a camper trailer which requires a brake controller, it also needs a switched 12v “ignition” on pin #2 for the redarc manager 30 to commence charging. The Elecbrakes brake controller would also like to use pin #2 to power the device - 10a (if possible - otherwise leave park lights on).
What would be the best way to have pin #2 switched 12v with 10a available for the brake controller? Is this something which can be programmed in the trailer module or will it require external wiring?
Many thanks in advance for your input.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Elecbrakes Brake Controller & Pin #2
-
- New Member
- Posts: 2
- Joined: Sat Feb 29, 2020 5:20 pm
- Location: Perth
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
Trend MY18. Stedi LED headlight conversion with 21.5" Stedi lightbar in grill. Lightforce facia for UHF RJ45 and switches. SCF rock sliders and GMF UHF antenna bonnet mount. Otherwise its just a stock car.