Hi will a sync 3 system fit into a 2017 xl and work without programing
Thanks Greg
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Sync 3
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Have never done one. There will be a lot of components requires due to the screen size difference, also wiring will be different between Sync1 and 3 and need to be modified to suit.
I have not invested at this point in time to purchase XL face plates Sync 1 etc to see what is involved.
Programming wise it should just work but you will end up changing some programming as some of the functions will not be applicable to your vehicle.
It is plausible that the fascia will have to be programmed to suit non climate as you most likely will not have the cabin temp sensor.
I have not invested at this point in time to purchase XL face plates Sync 1 etc to see what is involved.
Programming wise it should just work but you will end up changing some programming as some of the functions will not be applicable to your vehicle.
It is plausible that the fascia will have to be programmed to suit non climate as you most likely will not have the cabin temp sensor.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
