Anybody know if the instrument clock on a PX1 can be changed without using the radio?
My son in law swapped out the original radio for an aftermarket unit and does not have steering wheel control of the new radio nor can he set the clock in the instrument cluster.
Any thoughts?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
2015 PX1 XLT clock
-
Ranger17
- Donator
- Posts: 15
- Joined: Wed Mar 14, 2018 6:12 pm
- Location: Lockyer Valley SEQLD
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 12 times
- Been thanked: 1 time
2020 XLT PX3 MY21.25
Supercab, Tech Pack, Auto,
6 Wheeler Conversion
Tub gone, Tray on, Jackoff Canopy,
Barret Intercooler, Stage 2 Turbo, ECU Re-Map, Transmission cooler,
Bulbar, Snorkel, Winch, Clearview Mirrors, Ultragauge.
Supercab, Tech Pack, Auto,
6 Wheeler Conversion
Tub gone, Tray on, Jackoff Canopy,
Barret Intercooler, Stage 2 Turbo, ECU Re-Map, Transmission cooler,
Bulbar, Snorkel, Winch, Clearview Mirrors, Ultragauge.
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Not that I have ever seen. As you said radio has been removed and that is where the time was coming from to be dispalyed in the first place.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
Ranger17
- Donator
- Posts: 15
- Joined: Wed Mar 14, 2018 6:12 pm
- Location: Lockyer Valley SEQLD
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 12 times
- Been thanked: 1 time
Thanks Stewart, I thought as much.
He has the time displayed in the cluster but it defaults to midnight when the battery is disconnected and re- connected. I told him to disconnect and reconnect at midnight if it bothers him that much.
He has the time displayed in the cluster but it defaults to midnight when the battery is disconnected and re- connected. I told him to disconnect and reconnect at midnight if it bothers him that much.
2020 XLT PX3 MY21.25
Supercab, Tech Pack, Auto,
6 Wheeler Conversion
Tub gone, Tray on, Jackoff Canopy,
Barret Intercooler, Stage 2 Turbo, ECU Re-Map, Transmission cooler,
Bulbar, Snorkel, Winch, Clearview Mirrors, Ultragauge.
Supercab, Tech Pack, Auto,
6 Wheeler Conversion
Tub gone, Tray on, Jackoff Canopy,
Barret Intercooler, Stage 2 Turbo, ECU Re-Map, Transmission cooler,
Bulbar, Snorkel, Winch, Clearview Mirrors, Ultragauge.
-
Asryael
- Junior Member
- Posts: 14
- Joined: Sun Dec 15, 2019 12:09 am
- Location: Queensland
- Model Of Vehicle: RANGER XLS PX
- Year Of Vehicle: 2013
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
Bit late to the conversation, but just saw this whilst browsing. On my Aerpro kit, holding down the "Voice" button on the left hand side of the steering wheel for ~5-10 seconds will trigger the factory radio to turn on, and the steering wheel control to pass through all the button presses. Not pressing any buttons for ~10 seconds will "turn off" the radio (Back to just date/time screen). This was with the Connects2U module for the steering wheel control adapter. I did also play around with the DIP switches in there, so that may have had an impact.
2013 Dual Cab XLS 3.2L Ranger (Manual)