Ranger Mods

Share your mods
https://saeb.net/forum/

Auto Door Locking + Folding Mirrors PX3

https://saeb.net/forum/viewtopic.php?t=2165

Page 3 of 4

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Wed Mar 18, 2020 7:36 pm
by saeb
Auto lock will be in right hand cluster screen, settings/vehicle/locks - auto lock

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Sep 13, 2020 5:36 pm
by Phillwehbe89
hi i have a 20.75 wildtrak. Im having trouble with disabling auto start stop. Ive done it from the pcm but in the bcm im getting confuse because its says bms auto start system. Do i switch it off?

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Sep 13, 2020 10:18 pm
by saeb
Don't do it in the PCM.

Do it in BCM only. In the filter box up the top type stop and it will show one I have put in that has IPC wording in brackets. Disable that one and that is all. Don't worry about the IPC.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Tue Sep 15, 2020 5:48 am
by Phillwehbe89
My mistake i put pcm instead of ipc in my message. So like in the photo should i disable the ( bms/ auto start stop system,) cheers

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Tue Sep 15, 2020 4:15 pm
by saeb
That should be fine.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Tue Sep 15, 2020 7:15 pm
by Phillwehbe89
Thanks Stewart ill try it out tomorrow and post it for other users. Cheers

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Wed Sep 16, 2020 5:00 pm
by Phillwehbe89
Thanks Stewart ive done it and it works. Ive noticed the voltage stays at 14.3. Usually it goes down to around 12.5 after a minute after starting the car. Is it coz the bms swiches off with that disabling the auto start stop? And should i change the voltage in the settings?

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Wed Sep 16, 2020 6:47 pm
by saeb
Because you have disable the battery management system which control stop start. Alternator will not turn off now and supply full voltage at all times.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Sep 27, 2020 5:10 pm
by Phillwehbe89
should i make any adjustments to the battery settings?

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Sep 27, 2020 6:58 pm
by saeb
I don't believe any other changes will matter. Disabling start stop disable the battery monitoring system.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Sep 27, 2020 8:22 pm
by jlc123
20200927_202133.jpg
20200927_202133.jpg (333.23 KiB) Viewed 440 times
20200927_202133.jpg
20200927_202133.jpg (333.23 KiB) Viewed 440 times
This worked for my MY20.75 wildtrak

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Mon Oct 05, 2020 4:47 pm
by petez69
I contacted Ford Australia today regaring my PX3 XLS 2020.75 model. Appears it has been removed due to EU regulations. They couldnt tell me any more however this option has been removed, sounds like from the above posts the underlying code has also been removed.....sucks as I was keen to get this going.....

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Fri Oct 09, 2020 1:51 am
by saeb
petez69 wrote: ↑Mon Oct 05, 2020 4:47 pm I contacted Ford Australia today regaring my PX3 XLS 2020.75 model. Appears it has been removed due to EU regulations. They couldnt tell me any more however this option has been removed, sounds like from the above posts the underlying code has also been removed.....sucks as I was keen to get this going.....
What has been removed? Nothing has been removed.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Wed Nov 25, 2020 5:34 pm
by cdvreede
Works like a dream on my 20.75 Trend. Was told by dealer that "this car doesn't have it" - now it does.

Thnx guys!!

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Mon Dec 28, 2020 7:31 pm
by Nicbic
saeb wrote: ↑Mon Dec 10, 2018 3:37 pm Thought that would be the case.

Auto Lock

Change;

BCM
726-15-01 to x1x1-x1x1-x1xx
726-21-01 to xxx1-xxxx-xxxx

and

IPC
720-01-01 to xxxF-xxxx-xxxx


Do an ignition cycle and it should be able to be changed.
Just ran this on my MY19 XLT and working perfectly,
Cheers Stewart

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Mon Feb 01, 2021 6:01 am
by JaroosPL
Great, I set it up as you wrote and everything works.
you got a cold beer from me.
Ford Ranger 2020 2.0BT

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Tue Feb 02, 2021 1:19 pm
by t4thfavor
In case you want to give your alternator a break, you can plug an LED nightlight or a phone charger into the AC outlet if you have that option on your model. (I'm in the US, and that fully disables Auto Start/Stop without any BCM changes)

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sat Feb 06, 2021 7:39 pm
by geoffmc
Hi Stewart,

Thansk for your work and assistance with this. My OBD cable arrived this week and updaed via ForScan today and it worked like a charm!

cheers
Geoff

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Feb 21, 2021 1:42 pm
by corollavator
Is anyone able to tell me if Auto Door Lock is possible on a PX1? When I ran Forscan for the first time it was already showing as enabled but the system does not function.

Thanks Duncan

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sun Feb 21, 2021 3:53 pm
by saeb
corollavator wrote: ↑Sun Feb 21, 2021 1:42 pm Is anyone able to tell me if Auto Door Lock is possible on a PX1? When I ran Forscan for the first time it was already showing as enabled but the system does not function.

Thanks Duncan
Being an XL it would be doubtful.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sat Dec 18, 2021 7:37 pm
by Power1997
Awesome! been fighting with ford Customer service and the dealer over the user manual having "äutolock", keep getting told not an option.
Plug in this cable, change the codes, and Autolock now available. Everest 2021.75

Thanks Saeb, now to play with other codes...

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Fri Dec 24, 2021 8:02 am
by Scaffy
Is there a non-asbuilt option to do this or must it be done via asbuilt?

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Fri Dec 24, 2021 11:58 am
by saeb
Scaffy wrote: ↑Fri Dec 24, 2021 8:02 am Is there a non-asbuilt option to do this or must it be done via asbuilt?
Never looked. Just use the asbuilt in the last post on the first page. Just do the BCM 726 options, IPC change is not required due to PX3 not having the menu in the cluster anyway.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Fri Dec 24, 2021 11:59 pm
by Scaffy
saeb wrote: ↑Fri Dec 24, 2021 11:58 am
Scaffy wrote: ↑Fri Dec 24, 2021 8:02 am Is there a non-asbuilt option to do this or must it be done via asbuilt?
Never looked. Just use the asbuilt in the last post on the first page. Just do the BCM 726 options, IPC change is not required due to PX3 not having the menu in the cluster anyway.
Will do, thanks.

Re: Auto Door Locking + Folding Mirrors PX3

Posted: Sat Dec 25, 2021 1:08 pm
by Scaffy
saeb wrote: ↑Fri Dec 24, 2021 11:58 am
Scaffy wrote: ↑Fri Dec 24, 2021 8:02 am Is there a non-asbuilt option to do this or must it be done via asbuilt?
Never looked. Just use the asbuilt in the last post on the first page. Just do the BCM 726 options, IPC change is not required due to PX3 not having the menu in the cluster anyway.
I've just done it and I have the menu in the cluster on the Everest. I enabled Auto lock in non asbuilt IPC and did the two asbuilt in BdyCM
All times are UTC+10:00
Page 3 of 4