Page 1 of 1
Ultraguage TMPS
Posted: Wed Jul 26, 2017 11:16 am
by Spook
Hey all
Anyone using Ultragauge MX 1.3 and the TMPS M gauges?
My outputs are 345, 350, etc which I then put the out format as 05 to bring down to psi.
Is this what everyone else has?
Re: Ultraguage TMPS
Posted: Wed Jul 26, 2017 12:17 pm
by Spook
One othereason question. Does anyone know how to format the output to no decimal places?
Re: Ultraguage TMPS
Posted: Wed Jul 26, 2017 5:07 pm
by Spook
Found it - L/R: 10
Re: Ultraguage TMPS
Posted: Wed Jul 26, 2017 5:32 pm
by saeb
Posted them all here a while ago
viewtopic.php?f=19&t=58 Always check the sticky.
Out format = 05
L/R = 22 2 left, 2 right of decimal
L/R = 20 2 left no decimal
I did have a mistake from my copying and pasting efforts and the sticky has been amended.
Re: Ultraguage TMPS
Posted: Fri Aug 10, 2018 10:47 pm
by tangomike
Hi, is there a way to program Tyre temperature on ultra guage?
Re: Ultraguage TMPS
Posted: Sat Aug 11, 2018 6:12 pm
by saeb
From memory no. UG does not work with extended canbus frames from BCM. I will have to check this again with the BCM but definitely does not work with APIM and UG engineers don't want to know about it. Will add to the list to recheck.